Panasonic TH-103PF10EK manual Colour system / Panasonic Auto, Cinema reality

Setup for Input Signals

Colour system / Panasonic Auto

Select Signal from the “Setup” menu during AV(S Video) input signal. (“Signal [AV]” menu is displayed.)

Press to select the “Colour system” or “Panasonic Auto”.

Press to select each functions.

Setup	1/2
Signal
Component/RGB-in select
	RGB
Input label	PC
Power save	Off
Standby save	Off
Power management	Off
Auto power off	Off
OSD Language	English (UK)

If the picture image becomes unstable:

With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases become unstable. Should this occur, set the system to match the format of the input signal.

Press ACTION () button

Signal	[ AV ]
3D Y/C Filter (NTSC)	On
Colour system	Auto
Cinema reality	Off
Panasonic Auto (4 : 3)	4 : 3
P-NR	Off

Mode			Function
Colour system	Set the colour system to match the input signal. When selecting “Auto”, the colour system is automatically
	selected from NTSC/PAL/SECAM, however, M.NTSC signal is not displayed properly depending on
	the attached terminal board. To display M.NTSC signal, select “M.NTSC” in Colour system.
	Auto	PAL	SECAM	M.NTSC	NTSC
Panasonic Auto	Set to “4 : 3” to view 4:3 images in an unchanged format when Panasonic Auto is selected.
(4 : 3)	If you would like to view 4:3 images in Just format, set to “Just”.

Note:

Panasonic Auto does not function when BNC Dual Video Terminal Board (TY-FB9BD) is used.

Cinema reality

Cinema reality:

When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are recorded at 24 frames per second.

If the picture is not stable, turn the setting to off.

Note:

When On, this setting only affects the following signal input:

•NTSC / PAL signal input during “AV(S Video)” input signal.

•525i(480i), 625i(575i), 1125(1080) / 60i signal input during “Component” input signal.

Setup	1/2
Signal
Component/RGB-in select
	RGB
Input label	PC
Power save	Off
Standby save	Off
Power management	Off
Auto power off	Off
OSD Language	English (UK)

Press ACTION () button

1

2

Press to select Cinema reality.

Press to set On / Off.

Signal	[ AV ]
3D Y/C Filter (NTSC)	On
Colour system	Auto
Cinema reality	Off
Panasonic Auto (4 : 3)	4 : 3
P-NR	Off
Signal	[ Component ]
Cinema reality	Off
P-NR	Off

Signal	[ RGB ]
Sync	Auto
Cinema reality	Off
P-NR	Off

Signal	[ Digital ]
Cinema reality	Off
P-NR	Off

Press to exit from adjust mode.

41