Panasonic PT-L780E, PT-L780NTE manual Adjusting the picture

Page 19

Adjusting the picture

Colour Hue Setting (color temperature)

Noise Reduction (NR)

(When S-VIDEO/VIDEO/YPBPR

Select the item pressing the F or G buttons on the remote control unit or the projector.

Press the I or H buttons to set the selective items. For the value adjusting items, press the ENTER button to display an individual screen, and press the I or H buttons to adjust the setting.

When an S-VIDEO/VIDEO signal is being input

PICTURE

PICTURE MODE

STANDARD

COLOR TEMP.

STANDARD

COLOR

32

TINT

32

BRIGHT

32

CONTRAST

32

SHARPNESS

2

NR

1

TV-SYSTEM

AUTO1

STANDARD

 

STANDARD

HIGH

LOW

This is used to adjust the white areas of the picture if they appear bluish or reddish.

COLOR

(S-VIDEO/VIDEO/YPBPRonly)

signals are being input)

If the signal is of such poor quality that picture interference appears, you can suppress this interference by adjusting the NR (Noise Reduction), except for 750p (720p), HDTV60 (1080i/60) and HDTV50 (1080i/50) signals. To strengthen the effect, press the H button. To turn it off , set to “0” by pressing the I button.

When an RGB/DVI signal is being input

PICTURE

PICTURE MODE

STANDARD

COLOR TEMP.

STANDARD

BRIGHT

32

CONTRAST

32

SHARPNESS

6

WHITE BALANCE R

32

WHITE BALANCE G

32

WHITE BALANCE B

32

STANDARD

 

SELECT:[^][@]

ENTER:[ENTER]

ADJUST:[{][}]

ESC:[MENU]

SELECT:[^][@] ENTER:[ENTER]

ADJUST:[{][}] ESC:[MENU]

When the NETWORK/SD CARD is selected (PT-L780NTE only)

PICTURE

PICTURE MODE

STANDARD

COLOR TEMP.

STANDARD

BRIGHT

32

CONTRAST

32

STANDARD

 

Press the H button to make the colour more vivid in tone, and press the I button to make the colour more pastel in tone.

TINT

(NTSC/NTSC 4.43/YPBPR only) This adjusts the flesh tones in the picture. Press the H button to make flesh tones more greenish, and press the I button to make the flesh tones more reddish.

BRIGHT

TV SYSTEM

(S-VIDEO/VIDEO only)

AUTO1

AUTO2

NTSC

NTSC4.43

PAL

PAL-M

PAL-N

Basic Operation

When a YPBPR signal is being input

PICTURE

PICTURE MODE

STANDARD

COLOR TEMP.

STANDARD

COLOR

32

TINT

32

BRIGHT

32

CONTRAST

32

SHARPNESS

2

NR

1

STANDARD

 

SELECT:[^][@]

ENTER:[ENTER]

ADJUST:[{][}]

ESC:[MENU]

SELECT:[^][@] ENTER:[ENTER]

ADJUST:[{][}] ESC:[MENU]

PICTURE MODE

STANDARD

DYNAMIC

NATURAL

Select the picture mode that best matches the image source and room conditions.

The mode best used in dark rooms is NATURAL. For rooms having regular lighting conditions in use, select STANDARD. For exceptionally bright rooms, use

DYNAMIC.

This adjusts the darker areas (black areas) in the picture. Press the H button if dark areas are too solid (for example, if hair is difficult to see), and press the I button if black areas are too light (grey rather than black).

CONTRAST

This adjusts the contrast of the picture. Press the H button to make the picture brighter, and press the

Ibutton to make the picture darker. (Adjust the BRIGHT setting first if required before adjusting the CONTRAST setting.)

SHARPNESS

Press the H button to make the picture details sharper, and press the I button to make the picture details softer.

SECAM

AUTO1 The projector automatically distinguishes between NTSC/NTSC 4.43/PAL/PAL60/SECAM signals.

AUTO2 The projector automatically distinguishes between NTSC/PAL- M/PAL-N signals.

NOTE:

BThis should normally be set to “AUTO1” or “AUTO2”. If the signal is of such poor quality that the correct format cannot be automatically distinguished, change the setting manually to the required TV system.

36-ENGLISH

ENGLISH-37

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Model No. PT-L780NTE LCD Projector Commercial UseModel number PT-L780NTE/PT-L780E Dear Panasonic CustomerImportant the Moulded Plug U.K. only Precautions with regard to safety ContentsDo not place liquid containers on top of the projector Do not handle the mains plug with wet handsInsert the mains plug securely into the mains socket Do not place the projector into water or let it become wetDo not mix old and new batteries AccessoriesDo not put your weight on this projector Use only the specified batteriesPrecautions on handling Projector Back and bottom Location and function of each partProjector control panel Remote control unitPT-L780NTE only Connector panelWireless mouse Using the remote control unitLaser beam pointer Operating range Inserting the batteriesExternal view SignalPin No Signal ConnectionsComputer for Control use Sub 9-pin DVD player Male MonitorProjection distances Setting-upProjection methods Projector positionTurning off the power Turning on the powerStarting to use Menu screens On-screen menusMenu operation guide Function Using the D.ZOOM digital zoomUsing the freeze function Returning a setting to the factory defaultAdjusting the picture Select Standard Adjusting the positionWhite Balance R/G/B Then use the I or H button toKeystone Clock PhasePosition DOT ClockChanging the display language Audio adjustmentOption settings Control KEY WEB PasswordAuto Power OFF StatusLens Select Installing the lensRemoving the lens Screen size Projection distance L Diagonal Height SH Width ET-LE10 for short-distance projectionET-LE20 for medium-distance projection ET-LE30 for long-distance projectionLens Short pin 1 and pin 9 when controlling Using the cable coverPin assignment and control Using the Serial connector Remedy IndicatorsList of compatible signals About the automatic setup functionCleaning procedure Lamp unit replacement periodTurn off the power Lamp unit replacement procedurePress and hold the Enter button for approximately 3 seconds Before calling for service, check the following points Before calling for serviceProblem Possible cause Sync HD/SYNC SpecificationsTrademark acknowledgements Dimensions
Top Page Image Contents