Panasonic PT-L780E, PT-L780NTE manual Monitor, Computer for Control use Sub 9-pin DVD player Male

Example of connecting to video equipments

Example of connecting to computer

Computer for

control use

D-sub 15 (male) - BNC5 (female) adapter cable (sold separately)

Red (connect to PR signal connector) Blue (connect to PB signal connector) Green (connect to Y signal connector)

Digital broadcast tuner or DVD player

Computer		Preparation
	Monitor

Computer for

control use

		D-sub 9-pin		DVD player
		(male)
				S-VIDEO IN
				L
USB	SERIAL	RGB1 IN	DVI-D IN	AUDIO OUT
			RGB2 IN/RGB OUT	R
				RGB AUDIO IN VIDEO IN AUDIO IN
	REMOTE	R/R-Y/PRG/Y	B/B-Y/PBSYNC/HD VD
			RGB3 IN

Video deck

DVD playerAudio system

Red (connect to PR signal connector)

Blue (connect to PB signal connector)

Green (connect to Y signal connector)

NOTE:

BOnly one audio system circuit is available for the AUDIO IN L-R jacks for S-VIDEO/VIDEO signals, so if you wish to change the audio input source, you will need to remove and insert the appropriate plugs.

BOnly one audio system circuit is available for the RGB AUDIO IN jacks, so if you wish to change the audio input source, you will need to remove and insert the appropriate plugs.

BIf an audio system is connected to the AUDIO OUT jack, the sound volume balance can be controlled by the remote control unit which is supplied with the projector.

BIf the video signal source is connected using a cable with a BNC connector plug, use a BNC/RCA adapter (sold separately) to convert the cable end to an RCA plug-type jack.

BRefer to page 61 for a list of compatible YPBPR signals which can be input to the projector.

BIf the signal cables are disconnected or if the power supply for the computer or video deck is turned off while the digital zoom function is being used, this function will be cancelled.

D-sub 9-pin
(male)				S-VIDEO IN
				L
USB	SERIAL	RGB1 IN	DVI-D IN	AUDIO OUT
			RGB2 IN/RGB OUT	R
				RGB AUDIO IN VIDEO IN AUDIO IN
	REMOTE	R/R-Y/PRG/Y	B/B-Y/PBSYNC/HD VD
			RGB3 IN

Computer

Audio system

DVI cable (Option) (ET-SCDV03)

Computer with

DVI-D OUT connector

NOTE:

BIt is better to shut down the computer before turning off the MAIN POWER switch of the projector.

BRefer to the list of compatible signals on page 61 for the types of RGB signals which can be input to the projector by connecting a computer.

BDo not input the signal to the RGB2 IN/RGB OUT connector when the RGB2 SELECT item in the OPTION menu is set to OUTPUT. (Refer to page 44.)

Refer to the accessory CD-ROM for details on connecting the projector to a personal computer by means of a wireless or wired network using an optional wireless card or projector LAN card. (PT-L780NTE only)

24-ENGLISH ENGLISH-25