Panasonic manual Dear Panasonic Customer, Model number PT-L780NTE/PT-L780E

Page 2

Dear Panasonic Customer:

This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most performance out of your new product, and that you will be pleased with your Panasonic LCD projector.

The serial number of your product may be found on its back. You should note it in the space provided below and retain this booklet in case service is required.

Model number: PT-L780NTE/PT-L780E

Serial number:

IMPORTANT SAFETY NOTICE

WARNING: THIS APPARATUS MUST BE EARTHED.

WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture.

Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB

(A) according to ISO 7779.

WARNING:

1)Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.

2)To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel.

3)Do not remove the earthing pin on the power plug. This apparatus is equipped with a three prong earthing-type power plug. This plug will only fit an earthing-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the earthing plug.

Caution: To assure continued compliance, use only shielded interface cables when connecting to computers or peripheral devices. Any unauthorized changes or modifications to this equipment will void the user's authority to operate.

IMPORTANT: THE MOULDED PLUG (U.K. only)

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark ASA or the BSI mark on the body of the fuse.

If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from an Authorised Service Centre.

If the fitted moulded plug is unsuitable for the socket outlet in your home, then the fuse should be removed and the plug cut off and disposed of safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.

If a new plug is to be fitted, please observe the wiring code as shown below. If in any doubt, please consult a qualified electrician.

WARNING: — THIS APPLIANCE MUST BE EARTHED.

IMPORTANT: — The wires in this mains lead are coloured in accordance

with the following code: — Green-and-Yellow: Earth

Blue:Neutral

Brown:Live

As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.

The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked with the letter E or by the

Earth symbol or coloured GREEN or GREEN-AND-YELLOW.

The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED.

How to replace the fuse. Open the fuse

 

 

 

 

13

63/A

 

 

 

compartment with a screwdriver and replace the

 

 

B

S

 

 

 

 

 

 

 

 

 

 

 

 

 

250V

 

 

 

 

 

N

fuse.

13

A

 

 

 

 

 

 

 

 

L

 

 

 

 

-8

FUSE

 

 

 

 

 

 

 

 

 

 

 

 

A

H

E

 

 

 

 

 

A S

 

 

 

 

Preparation

2-ENGLISH

ENGLISH-3

Image 2
Contents LCD Projector Commercial Use Model No. PT-L780NTEImportant the Moulded Plug U.K. only Dear Panasonic CustomerModel number PT-L780NTE/PT-L780E Contents Precautions with regard to safetyDo not place the projector into water or let it become wet Do not handle the mains plug with wet handsInsert the mains plug securely into the mains socket Do not place liquid containers on top of the projectorUse only the specified batteries AccessoriesDo not put your weight on this projector Do not mix old and new batteriesPrecautions on handling Location and function of each part Projector Back and bottomRemote control unit Projector control panelConnector panel PT-L780NTE onlyLaser beam pointer Using the remote control unitWireless mouse Inserting the batteries Operating rangeConnections SignalPin No Signal External viewMonitor Computer for Control use Sub 9-pin DVD player MaleProjector position Setting-upProjection methods Projection distancesStarting to use Turning on the powerTurning off the power On-screen menus Menu screensMenu operation guide Returning a setting to the factory default Using the D.ZOOM digital zoomUsing the freeze function FunctionAdjusting the picture Then use the I or H button to Adjusting the positionWhite Balance R/G/B Select StandardDOT Clock Clock PhasePosition KeystoneAudio adjustment Changing the display languageOption settings Status WEB PasswordAuto Power OFF Control KEYRemoving the lens Installing the lensLens Select ET-LE30 for long-distance projection ET-LE10 for short-distance projectionET-LE20 for medium-distance projection Screen size Projection distance L Diagonal Height SH WidthLens Pin assignment and control Using the cable coverShort pin 1 and pin 9 when controlling Using the Serial connector Indicators RemedyAbout the automatic setup function List of compatible signalsLamp unit replacement period Cleaning procedurePress and hold the Enter button for approximately 3 seconds Lamp unit replacement procedureTurn off the power Problem Possible cause Before calling for serviceBefore calling for service, check the following points Specifications Sync HD/SYNCDimensions Trademark acknowledgements