WEB PASSWORD
You can set the password for controlling the projector with a personal computer by means of a wireless or wired network using an optional wireless or projector LAN
“ALL”: The projectors can be simultaneously controlled from any remote control unit regardless of their ID settings.
“1”: The projector can be controlled from the remote control unit with its projector ID set to “1”.
“2”: The projector can be controlled from the remote control unit with its projector ID set to “2”.
This feature will not function under the following situation.
1)When the NETWORK or SD CARD is selected
2)When using the freeze function.
3)When writing the data in the SD memory card
NOTE:
While projector is connected to a personal computer by means of a wireless or wired network using an optional wireless card or projector LAN card with the WEB STANDBY set to “ON”, the cooling fan operates and the power indicator on the projector flashes slowly in red. (Refer to page 45)
card. Use the F or G buttons to change the characters, and use the
I or H buttons to change the |
character position. When finished, |
press the ENTER button. The |
projector comes from the factory |
without any password. |
“3”: The projector can be controlled from the remote control unit with its projector ID set to “3”.
SET ID | ALL |
|
| [� |
|
| 1 | � |
| [ |
|
| 2 | � |
| [� |
|
NETWORK SETUP (PT-L780NTE only)
You need make adjustment on some items when controlling the projector with a personal computer by means of the wireless or wired network, using an optional wireless card or projector LAN card. Refer to the accessory CD- ROM for details.
If password setting is complete, the |
password will not be displayed on |
the WEB PASSWORD screen. |
When you forget it, set it again from |
the beginning. |
3 | � |
NOTE:
SET ID is set to “ALL “ by default. Hence ID number need not be set when only one projector is used.
NETWORK
STATUS | LAN1 |
WEP | KEY1 |
STATUS
This setting is used to adjust the LAN to control the projector by means of the wireless or wired network.
CONTROL KEY
To make the buttons on the projector not function, set the CONTROL KEY to “OFF”.
To use the buttons on the projector, set to ON. (page 14)
FUNC 1
If the projectors are given ID numbers, their remote control units must be assigned the same ID numbers, respectively.
If the SET ID s of two or more projectors are set to “ALL”, the user will not be able to control them separately.
SELECT:[^][@]調整：［←］［→］ENTER:[ENTER]� ESC:[MENU]
WEP
This setting is for encrypting data transmitted by means of the wireless network. (This item will not be displayed when an optional projector LAN card is used.)
Operation
This assigns a function to the FUNC1 button of the remote control unit .
MUTE
BFunctions in the same way as the |
The projector can be turned ON/OFF from the remote control unit only if the projector ID is set in the remote control unit. For the details of
SD CARD SETUP (PT-L780NTE only)
The following settings are used when projecting the pictures recorded in the SD memory card. Refer to the accessory
Advanced
MUTE function. (page 43) |
KEYSTONE
BFunctions in the same way as when “KEYSTONE” is selected from the POSITION menu screen. (page 40)
SET ID
SET ID is used to set projector IDs to control two or more projectors either simultaneously or separately.
projector ID setting, see page 21.
AUTO POWER OFF
If any signal is not input into the projector during the time that you set up, the projector will return to standby mode. The auto power off time can be set to, from 15 minutes to 60 minutes, by 5 minutes. If you don't use this feature, set it to “OFF”.
SD CARD
AUTOPLAY | OFF | ON |
REPEAT | 1 |
|
INTERVAL | 5 | sec |
SELECT:[^][@] ENTER:[ENTER]
ADJUST:[{][}] ESC:[MENU]
AUTO PLAY
Plays the pictures recorded in the SD memory card automatically.
REPEAT
This setting is for adjusting the times of the auto play.
INTERVAL
This setting is adjusting the interval of the auto play.