Panasonic PT-L780NTE, PT-L780E manual Audio adjustment, Changing the display language

Page 22

NOTE:

BS1 video signals

S1 video signals are a type of video

signal with an aspect ratio of 16:9

which include a detector signal. This

detector signal is output by some

sources such as wide-vision video

decks. If the AUTO setting above is

selected, this projector will recognise

the detector signal and automatically

switch the aspect ratio to 16:9 in

order to project the picture.

BThis projector is equipped with an

aspect ratio selection function.

However, if a mode which does

not match the aspect ratio of the

input signal is selected, it may

affect the quality of viewing of the

original picture. Keep this in mind

BWhen a VGA60 or 525p RGB signal is being input, select the signal in accordance with the input signal.

RESIZING

This should normally be set to “ON”. (This setting is only for signals which have lower resolutions than the LCD panels. Refer to page 61 for details.)

ON

The pixel resolution of the input signal is converted to the same resolution as the LCD panels before being projected. For signals with lower resolutions, gaps in the pixels are automatically interpolated into the picture before it is projected.

Audio adjustment

Select the items by pressing the F or G buttons on the remote control unit or the projector.

AUDIO

VOLUME

20

 

MUTE

OFF

ON

SELECT:[^][@] ENTER:[ENTER]

ADJUST:[{][}] ESC:[MENU]

VOLUME

Press the I or H buttons to adjust the volume of the sound output by the projector’s built-in speakers.

MUTE

Set the MUTE to “ON” pressing the

Ior H buttons to turn off the volume of the sound output. To release muting, set to “OFF” pressing the I or H buttons.

Operation

when selecting the aspect ratio.

BIf using this projector in places

such as cafes or hotels with the

aim of displaying programmes for

viewing for a commercial purpose

or for public presentation, note

that if the aspect ratio (16:9)

selection function is used to

change the aspect ratio of the

screen picture, you may be

infringing the rights of the original

copyright owner for that

programme under copyright

protection laws.

BIf a normal (4:3) picture which

was not originally intended for

wide-screen viewing is projected

onto a wide screen, distortion

may occur around the edges of

the picture so that part of the

picture is no longer visible. Such

programmes should be viewed in

4:3 mode to give proper

consideration to the aims and

intentions of the original

programme’s creator.

This may sometimes cause problems with the quality of the picture.

OFF

The picture signal is projected at its original resolution, with no pixel conversion. The projected picture will be smaller than normal, so adjust the zoom setting or move the projector forwards or backwards to adjust the picture size if necessary. If set to “OFF”, some features, such as D.ZOOM (digital zoom) or keystone distortion correction will not function.

AUTO SETUP

This item functions in the same way as the AUTO SETUP button on the remote control unit. (page 14)

FRAME LOCK

If the picture’s condition is bad while a RGB moving picture signal is projected, set the FRAME LOCK to “ON”. Refer to page 61 on compatible RGB signals.

Changing the display language

Use the F and G buttons on the projector or remote control unit to select a language, then press the MENU button to accept the setting.

LANGUAGE

ENGLISHITALIANO

DEUTSCH

FRANÇAIS

ESPAÑOL

SELECT:[^][@][{][}] ENTER:[ENTER]

ADJUST:[{][}]ESC:[MENU]

Basic

42-ENGLISH

ENGLISH-43

Page 21 Page 23
Image 22
Page 21 Page 23
Contents LCD Projector Commercial Use Model No. PT-L780NTEModel number PT-L780NTE/PT-L780E Dear Panasonic CustomerImportant the Moulded Plug U.K. only Contents Precautions with regard to safetyDo not place the projector into water or let it become wet Do not handle the mains plug with wet handsInsert the mains plug securely into the mains socket Do not place liquid containers on top of the projectorUse only the specified batteries AccessoriesDo not put your weight on this projector Do not mix old and new batteriesPrecautions on handling Location and function of each part Projector Back and bottomRemote control unit Projector control panelConnector panel PT-L780NTE onlyWireless mouse Using the remote control unitLaser beam pointer Inserting the batteries Operating rangeConnections SignalPin No Signal External viewMonitor Computer for Control use Sub 9-pin DVD player MaleProjector position Setting-upProjection methods Projection distancesTurning off the power Turning on the powerStarting to use On-screen menus Menu screensMenu operation guide Returning a setting to the factory default Using the D.ZOOM digital zoomUsing the freeze function FunctionAdjusting the picture Then use the I or H button to Adjusting the positionWhite Balance R/G/B Select StandardDOT Clock Clock PhasePosition KeystoneAudio adjustment Changing the display languageOption settings Status WEB PasswordAuto Power OFF Control KEYLens Select Installing the lensRemoving the lens ET-LE30 for long-distance projection ET-LE10 for short-distance projectionET-LE20 for medium-distance projection Screen size Projection distance L Diagonal Height SH WidthLens Short pin 1 and pin 9 when controlling Using the cable coverPin assignment and control Using the Serial connector Indicators RemedyAbout the automatic setup function List of compatible signalsLamp unit replacement period Cleaning procedureTurn off the power Lamp unit replacement procedurePress and hold the Enter button for approximately 3 seconds Before calling for service, check the following points Before calling for serviceProblem Possible cause Specifications Sync HD/SYNCDimensions Trademark acknowledgements
Top Page Image Contents