Panasonic PT-L780E, PT-L780NTE About the automatic setup function, List of compatible signals

About the automatic setup function

If you press the AUTO SETUP button, the items given in the table below will be set automatically. The setting details change according to the signal which is being input. Refer to the table below for details.

	Horizontal/		Automatic
		Dot clock/	vertical
	vertical
		clock phase	keystone
	position
			correction
VIDEO/S-VIDEO/			Yes
NETWORK/SD CARD
YPBPR			Yes
DVI			Yes
Dot Clock
frequency	Yes	No	Yes
is 140 MHz
or higher
Signal other		Yes
than above

NOTE:

BIf the edges of the projected picture are indistinct, or if a dark picture is being projected, the automatic setup processing may stop automatically before it is complete. If this happens, project a different picture and then press the AUTO SETUP button once more, or make the above adjustments manually.

BIf you would like to make further adjustments to the picture, use the menu commands which are listed on page 30 and subsequent pages.

List of compatible signals

		Display	Scanning		Dot clock
			frequency			Picture
Mode		resolution			frequency		Resizing*3	Format
			H	V		quality*2
		(dots)*1			(MHz)
			(kHz)	(Hz)
NTSC/NTSC4.43/		720 x 480i	15.734	59.940		A	OK	Video/S-Video
PAL-M/PAL60
PAL/PAL-N/SECAM		720 x 576i	15.625	50.000		A	OK	Video/S-Video
525i		720 x 480i	15.734	59.940	13.500	A	OK	YPBPR/RGB
625i		720 x 576i	15.625	50.000	13.500	A	OK	YPBPR/RGB
525p		720 x 483	31.469	59.940	27.000	A	OK	YPBPR/RGB
HDTV60		1 920 x 1 080i	33.750	60.000	74.250	A		YPBPR/RGB
HDTV50		1 920 x 1 080i	28.125	50.000	74.250	A		YPBPR/RGB
750P		1 280 x 720	45.000	60.000	74.250	A		YPBPR/RGB
VESA70		640 x 400	31.469	70.086	25.175	A	OK	RGB
VESA85		640 x 400	37.861	85.081	31.500	A	OK	RGB
VGA60	*4	640 x 480	31.469	59.940	25.175	A	OK	RGB
VGA65		640 x 480	35.000	66.667	30.240	A	OK	RGB
VGA72		640 x 480	37.861	72.809	31.500	A	OK	RGB
VGA75		640 x 480	37.500	75.000	31.500	A	OK	RGB
VGA85		640 x 480	43.269	85.008	36.000	A	OK	RGB
SVGA55		800 x 600	35.156	56.250	36.000	A	OK	RGB
SVGA60 *4		800 x 600	37.879	60.317	40.000	A	OK	RGB
SVGA70		800 x 600	48.077	72.188	50.000	A	OK	RGB
SVGA75		800 x 600	46.875	75.000	49.500	A	OK	RGB
SVGA85		800 x 600	53.674	85.061	56.250	A	OK	RGB
MAC16		832 x 624	49.725	74.550	57.283	A	OK	RGB
XGA60	*4	1 024 x 768	48.363	60.004	65.000	AA		RGB
XGA70		1 024 x 768	56.476	70.069	75.000	AA		RGB
XGA75		1 024 x 768	60.023	75.029	78.750	AA		RGB
XGA85		1 024 x 768	68.678	84.997	94.500	AA		RGB
XGA85i		1 024 x 768i	35.520	86.952	44.897	AA		RGB
MXGA70		1 152 x 864	63.995	71.184	94.200	A		RGB
MXGA75		1 152 x 864	67.500	74.917	108.000	A		RGB
MXGA85		1 152 x 864	76.705	85.038	121.500	A		RGB
MAC21		1 152 x 870	68.681	75.062	100.000	A		RGB
MSXGA60 *4		1 280 x 960	60.000	60.000	108.000	A		RGB
SXGA60	*4	1 280 x 1 024	63.981	60.020	108.000	A		RGB
SXGA75		1 280 x 1 024	79.977	75.025	135.001	A		RGB
SXGA85		1 280 x 1 024	91.146	85.024	157.500	B		RGB
SXGA60+ *4		1 400 x 1 050	63.981	60.020	108.000	A		RGB
UXGA60 *4		1 600 x 1 200	75.000	60.000	162.000	B		RGB

*1 The “i” appearing after the resolution indicates an interlaced signal. *2 The following symbols are used to indicate picture quality.

AA Maximum picture quality can be obtained.

ASignals are converted by the image processing circuit before picture is projected

BSome loss of data occurs to make projection easier.

*3 Signals with “OK” in the Resizing column can be set using the RESIZING command in the PICTURE menu. (Refer to page 42.)

*4 Signals that are compatible with the FRAME LOCK function. (page 42.) DVI signal is compatible only with VGA60, SVGA60, XGA60 and SXGA60.

Others

60-ENGLISH ENGLISH-61