DVD VCD
Slow motion/frame advance
Slow motion
During playback, press either of the SLOW buttons (
/ 
) to slow playback in either direction.
Pressing PLAY resumes normal speed playback.
Repeated presses of the SLOW buttons change the slow playback speed:
: 1/8 q 1/4 q 1/2 q playback at normal speed
:1/20 q 1/16 q 1/12 q playback at normal speed
Frame advance
If you press the SLOW buttons when playback is paused, you can advance or go back a frame at a time.
Pressing PLAY restarts playback at normal speed.
<Sound is muted while slow playback or frame advance is taking place.
<You cannot use backward slow motion or frame advance with video CDs. Also some discs may not allow this. In these cases, the prohibit mark “A” is shown on screen if you attempt slow motion or frame advance.
<If the still or slow picture appears blurred, check the “still mode” setting (see page 45).
DVD
Lip sync
This function allows you to adjust the synchronization of the video and audio portions of a DVD.
Press the LIP SYNC button to display the current lip sync value (default is 0). Use the left and right cursor buttons to adjust the value. Positive values mean that the sound is delayed relative to the picture.
<Press LIP SYNC again to cancel this setting. Any other operational display appearing on screen will also cancel this setting. Note that lip sync should be cancelled if you need to use the left and right cursor buttons to navigate menus, etc.
<The lip sync value you set is stored when you turn the unit off, and will be remembered next time you turn the unit on again.
<This function has an effect on the signals output from the following terminals:
AUDIO OUT, i.LINK (AUDIO), HDMI
•When using the HDMI terminal, set Dolby Digital, DTS and MPEG Audio of “Audio Digital Out” setting to “PCM” (see page 43).
•When using the i.LINK terminal, set the i.LINK output setting to “PCM” (see pages 33).
26