Settings (Audio)
Analog output settings
[AUDIO q Analog Out]
2ch
Outputs
If
Multi Channel
The unit outputs the
Select this when the unit is connected to a surround amplifier The MULTI indicator will light on the display.
*: Only when “i.LINK” is set to “PCM” (see page 33).
**: Only when “Audio Digital Out” settings are all set to “PCM” (see page 43).
<Note that if “Multi Channel” is selected, only the front L/R sound of the
<Note that the audio volume changes when the mode is changed between
<Note that some DVD discs cannot be downmixed (from multi channel to
<Speakers should be set up properly for
<Note that if “Multi Channel” is selected and if the connected HDMI component cannot accept
<You can also use the 2CH/MULTI button of the remote control unit to select either “2ch” or “Multi Channel”.
When playback is stopped, press the 2CH/MULTI button.
Digital output settings
[AUDIO q Digital Out]
ON
Audio is output from the DIGITAL OUT, the i.LINK (AUDIO) and the HDMI terminals.
OFF | ENGLISH |
| |
Audio is not output from the DIGITAL OUT, the i.LINK |
|
(AUDIO) and the HDMI terminals. If you are not using these |
|
terminals, we suggest that you use this OFF setting to reduce |
|
influence on the analog sound. |
|
CD Digital Direct
[AUDIO q CD Digital Direct]
Direct
This setting bypasses unnecessary circuitry and provides better sound quality when listening to audio CDs.
Normal
When playing back
35