Esoteric UX-3 Pi, UX-1 Pi owner manual Playback, Press the Power button to turn the unit on

DVD VCD CD SA-CD DVD-A

Playback (1)

3 2 4

1 5

1Press the POWER button to turn the unit on.

The ring surrounding the button lights when the unit is on.

2Press the OPEN/CLOSE button (L) to open the tray.

<The tray opens after a few seconds (this delay is normal and is due to movement of the VRDS and other mechanisms within the unit).

3Insert the disc label side up.

<In the case of double-sided discs, the side to be played should be face down.

<Make sure the disc is centered in the tray in order to avoid any malfunction or jamming of the tray or damage to the disc.

4Press the OPEN/CLOSE button (L) again to close the tray.

ENGLISH

The tray will close. Take care that you don’t catch your fingers in the tray.

The unit reads the disc (this may take a little time). Some discs may automatically start playback.

5Press the PLAY button to start playback if playback has not started automatically.

If a menu is shown on screen (some DVD or video discs may show such a menu), see the next section.

19