Esoteric UX-3 Pi, UX-1 Pi owner manual Before Use, What’s in the box, Conventions about This Manual

Before Use (1)

What’s in the box

Please confirm that the following accessories are in the box when you open it.

Remote control unit x 1

Batteries (AA, R6, SUM-3) x 2

Felt sheet x 3

Power cord x 1

Owner’s manual x 1

Warranty card x 1

Conventions about This Manual

<Instructions in this manual describe the controls on the remote control. You can also use the buttons on the front panel if they have the same or similar names as those on the remote.

<The types of functions and operations that can be used for a particular disc vary depending on the features of that disc. In some cases, these functions and operations may differ from the descriptions given in this owner’s manual. In this event, follow the instructions given on the screen. This owner’s manual only covers basic disc operations.

<For some operations, the PROHIBIT mark “A” may appear on the screen. This indicates that the operation described in this owner’s manual is not permitted for the current disc.

<The drawings about the TV screen and front panel display used in this owner’s manual are purely for the purposes of explanation. The actual displays may differ slightly from what are shown here.

Read this before operation

< Be careful to avoid injury when moving the unit, on account

of its weight. Get someone to help you if necessary.
< To protect easily scratched furniture, you may stick the felt
supplied with the unit to the feet.
< As the unit may become warm during operation, always leave
sufficient space around the unit for ventilation.
< The voltage supplied to the unit should match the voltage as
printed on the rear panel. If you are in any doubt regarding
this matter, consult an electrician.
< Choose the installation location of your unit carefully. Avoid
placing it in direct sunlight or close to a source of heat. Also	ENGLISH
avoid locations subject to vibrations and excessive dust, heat,
cold or moisture.
< Do not place the unit on the amplifier/receiver.
< Do not open the cabinet as this might result in damage to the
circuitry or electrical shock. If a foreign object should get into
the unit, contact your dealer or service company.
< When removing the power plug from the wall outlet, always
pull directly on the plug, never yank the cord.
< To keep the laser pickup clean, do not touch it, and always
close the disc tray.
< Do not attempt to clean the unit with chemical solvents as
this might damage the finish. Use a clean, dry cloth.
< Keep this manual in a safe place for future reference.
DO NOT MOVE THE UNIT DURING PLAYBACK
During playback, the disc rotates at high speed. Do NOT lift or
move the unit during playback. Doing so may damage the
disc or the unit.
WHEN MOVING THIS UNIT
When changing places of installation or packing the unit for
moving, be sure to remove the disc and return the disc tray to
its closed position in the player. Then, press the power switch
to turn the power off, and disconnect the power cord.
Moving this unit with the disc loaded may result in damage to
this unit.

5