Esoteric UX-3 Pi, UX-1 Pi owner manual Restoring factory settings

Page 7

Restoring factory settings

If you have made a lot of changes to the setup, and want to restart from a known set of options, restore the unit to the factory settings as follows:

1.Turn the unit off and wait 30 seconds or longer.

2.Press the POWER button while holding down the STOP button.

Release the STOP button when “Setup CLR” appears on the display.

All memories are erased, and the unit returns to the factory settings.

For European customers

Disposal of your old appliance

1.When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.

2.All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.

3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.

4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.

“DTS” is a registered trademark of DTS, Inc. and “DTS 96/24” is a trademark of DTS, Inc.

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.

“Super Audio CD” is a registered trademark. “DSD” is a registered trademark.

The i.LINK logo is a trademark of Sony Corporation, registered in the U.S. and other countries.

DVD Logo is a trademark of DVD Format/Logo Licensing Corporation.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

The UX-1 Pi/UX-3 Pi player uses six DACs with high-quality 14- bit 216MHz processing for video output. This type of DAC, the ADV7324, employs new Noise shaping Video (NSV) technology from Analog Devices, Inc. of the USA.

NSV technology uses multi-bit delta-sigma conversion, removing video noise and providing low noise and high linearity, without the loss of information that is often associated with analog filtering systems.

Noise Shaped Video and NSV are registered trademarks of Analog Devices, Inc.

To eliminate “jaggies” and produce clear natural images, the UX - 1 Pi/UX - 3 Pi uses DCDi (Directional Correlational Deinterlacing) technology. The circuits employed are from the Faroudja business devision of Genesis Microchip, and enable hardware based diagonal line detection and smoothing from a pixel based image. As a result, smoother progressive-scan images can be produced, with “jaggie” noise reduced by interpolation techniques.

ENGLISH

7

Image 7
Contents UX-1 Pi/UX-3 Pi Important Safety Instructions UX-1 Pi UX-3 Pi For U.S.AOptical pickup Contents Read this before operation Before UseWhat’s in the box Conventions about This ManualChanging the Color System NTSC/PAL Placement of the unitMaintenance Beware of condensationFor European customers Disposal of your old appliance Restoring factory settingsType of discs that can be played on this system DiscsExample of Icons used on DVD discs Following discs cannot be played with this unitComponent Video Connection to a TVB P R Component Video Hdmi D1/D2Video output terminal Hdmi video/audio output terminalD1/D2 video output terminals component Component video output terminalsAudio Connection to an amplifier etcDigital in Digital in Optical Coaxial Digital audio output terminals Link Audio terminalAnalog audio output terminals RS-232C Word sync connectorSignal GND connection Power cord receptacleFront panel features Understanding the remote control unit How to insert the batteries Front panel display Insert the disc label side up Press the Power button to turn the unit onPlayback Press the OPEN/CLOSE button L to open the trayOn-screen menu Opening and closing the tray Pausing playback freezing the pictureResume mode Stopping playbackSelecting a chapter or track Selecting groups and titlesSkipping playback Selecting the playback areaTitle, group, disc repeat Repeat modeFast scanning Chapter and track repeatSelecting subtitles Selecting audioUse the Subtitle button to select DVD subtitles DIMMER1 Changing camera angleDimming subtitles Dimmer OFFFrame advance Slow motion/frame advanceLip sync Slow motionDisplay dimming Turning video on and offOFF DVD video stopped, on-screen display Changing the display modeDVD video playback main unit display DVD video playback on-screen displaySuper Audio CD/CD/video CD playback on-screen display DVD audio playback on-screen displayDVD audio stopped, on-screen display Super Audio CD/CD/video CD playback main unit displayHrgb Hcol Hfrc Down Setting Digital Filter, HDMI, 4% down, Word Sync and i.LINKHdmi Hdmi video output format ADF Digital FilterHexp Hdmi expand Hasp Hdmi aspect ratioHfrc Hdmi Frame Rate Converter Link Word Word syncPCM Use the cursor buttons to navigate the menus Settings introductionFactory settings are marked with an asterisk Exit the setup mode by pressing Setup once moreCD Digital Direct Settings AudioAnalog output settings Digital output settingsAudio DRC Dynamic Range Control Group playback mode DVD audioDownmix Video adjustment Settings VideoEnter Audio language selection Settings LanguageProgressive scan setting DCDiDisplaying subtitles Subtitle language selectionOn-screen display language Language Code Language Code ListSpeaker Size Use these speaker setup menus in the following cases onlySpeaker levels General q Speaker Setting q DistanceGeneral q Speaker Setting q Level Speaker distanceDTS Settings GeneralTest tone length Digital output formatsTV screen Settings General/Video OutVideo output Closed captioning Still modeComponent video output PAL-NTSC conversionParental Control Settings General/DisplayPlaying a controlled disc Setting the level of controlResetting the password Country CodeGeneral TroubleshootingAudio Word Sync VideoData transfer rate How to connect multiple i.LINK-capable devicesLink IEEE1394 Copyright protection system Dtcp