Esoteric UX-3 Pi, UX-1 Pi owner manual Following discs cannot be played with this unit

Page 9

Following discs cannot be played with this unit:

CD-G, Data part of CD-EXTRA, PHOTO CD, CD-ROM and DVD-ROM discs

discs recorded in a color system other than PAL or NTSC

illegally produced discs

scratched or damaged discs

discs that are dusty, soiled or marked with fingerprints

Warning:

If you attempt to play back such discs, there is a risk that sudden loud noise can blast over the speakers at full volume and cause damage to the speakers and your hearing.

Copy-protected discs, DualDiscs and other discs that do not conform to the CD standard may not play back correctly in this player. If you use such discs in this unit, TEAC ESOTERIC COMPANY cannot be responsible for any consequences or guarantee the quality of reproduction. If you experience problems with such non-standard discs, you should contact the producers of the disc.

Example of Icons used on DVD discs:

number of audio tracks recorded on the disc

number of subtitles recorded on the disc

screen aspect ratio

disc recorded with multiple camera angles

region code

<Always place the disc on the disc tray with the label side up. (Compact discs can be played or recorded only on one side.)

<To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.

 

How to remove the disc

How to hold the disc

 

< Should the disc become dirty, wipe the surface radially (from

 

 

the center hole outward towards the outer edge) with a soft,

 

 

dry cloth:

 

 

<

Never use such chemicals as record sprays, antistatic sprays or

ENGLISH

 

fluid, benzine or thinner to clean the discs. Such chemicals will do irreparable damage to the disc’s plastic surface.

< Discs should be returned to their cases after use to avoid dust and scratches that could cause the laser pickup to “skip.”

< Do not expose discs to direct sunlight or high humidity and temperature for extended periods. Long exposure to high temperatures will warp the disc.

< Do not play any disc that is warped, deformed or damaged. Playing such discs may cause irreparable harm to the playing mechanisms.

< CD-R and CD-RW discs are more sensitive to the effects of heat and ultraviolet rays than ordinary CDs. It is important that they are not stored in a location where direct sunlight will fall on them, and which is away from sources of heat such as radiators or heat-generating electrical devices.

< Printable discs aren’t recommended, as the label side might be sticky and damage the unit.

< Do not stick papers or protective sheets on the discs and do not use any protective coating spray.

< Use a soft oil-based felt-tipped pen to write the information on the label side. Never use a ball-point or hard-tipped pen, as this may cause damage to the recorded side.

< Never use a stabilizer. Using commercially available CD stabilizers with this unit will damage the mechanisms and cause them to malfunction.

< Do not use irregular shape discs (octagonal, heart shaped, business card size, etc.). Discs of this sort can damage the unit:

< If you are in any doubt as to the care and handling of a disc, read the precautions supplied with the disc, or contact the disc manufacturer directly.

9

Image 9
Contents UX-1 Pi/UX-3 Pi Important Safety Instructions For U.S.A UX-1 Pi UX-3 PiOptical pickup Contents What’s in the box Before UseConventions about This Manual Read this before operationMaintenance Placement of the unitBeware of condensation Changing the Color System NTSC/PALFor European customers Disposal of your old appliance Restoring factory settingsType of discs that can be played on this system DiscsExample of Icons used on DVD discs Following discs cannot be played with this unitB P R Component Video Hdmi Connection to a TVD1/D2 Component VideoD1/D2 video output terminals component Hdmi video/audio output terminalComponent video output terminals Video output terminalConnection to an amplifier etc AudioDigital in Digital in Optical Coaxial Link Audio terminal Digital audio output terminalsAnalog audio output terminals Signal GND connection Word sync connectorPower cord receptacle RS-232CFront panel features Understanding the remote control unit How to insert the batteries Front panel display Playback Press the Power button to turn the unit onPress the OPEN/CLOSE button L to open the tray Insert the disc label side upOn-screen menu Resume mode Pausing playback freezing the pictureStopping playback Opening and closing the traySkipping playback Selecting groups and titlesSelecting the playback area Selecting a chapter or trackFast scanning Repeat modeChapter and track repeat Title, group, disc repeatSelecting audio Selecting subtitlesUse the Subtitle button to select DVD subtitles Dimming subtitles Changing camera angleDimmer OFF DIMMER1Lip sync Slow motion/frame advanceSlow motion Frame advanceTurning video on and off Display dimmingOFF DVD video playback main unit display Changing the display modeDVD video playback on-screen display DVD video stopped, on-screen displayDVD audio stopped, on-screen display DVD audio playback on-screen displaySuper Audio CD/CD/video CD playback main unit display Super Audio CD/CD/video CD playback on-screen displayHrgb Hcol Hfrc Down Setting Digital Filter, HDMI, 4% down, Word Sync and i.LINKHdmi Hdmi video output format ADF Digital FilterHasp Hdmi aspect ratio Hexp Hdmi expandHfrc Hdmi Frame Rate Converter Word Word sync LinkPCM Factory settings are marked with an asterisk Settings introductionExit the setup mode by pressing Setup once more Use the cursor buttons to navigate the menusAnalog output settings Settings AudioDigital output settings CD Digital DirectGroup playback mode DVD audio Audio DRC Dynamic Range ControlDownmix Settings Video Video adjustmentEnter Progressive scan setting Settings LanguageDCDi Audio language selectionSubtitle language selection Displaying subtitlesOn-screen display language Language Code Language Code ListSpeaker Size Use these speaker setup menus in the following cases onlyGeneral q Speaker Setting q Level General q Speaker Setting q DistanceSpeaker distance Speaker levelsTest tone length Settings GeneralDigital output formats DTSSettings General/Video Out TV screenVideo output Component video output Still modePAL-NTSC conversion Closed captioningParental Control Settings General/DisplayResetting the password Setting the level of controlCountry Code Playing a controlled discTroubleshooting GeneralAudio Word Sync VideoLink IEEE1394 How to connect multiple i.LINK-capable devicesCopyright protection system Dtcp Data transfer rate