Grundig Understanding Overscan and Picture Format Settings for Your Television

Television - OPERATION--------------------------------------------------------------------------------

Changing the picture format

The television automatically switches to the 16:9 format if this format is detected via the SCART socket.

1Select the picture format with » «.

–The picture format (for example »16:9«) is displayed.

–You can choose between the following

picture­ formats:

»4:3« format

The picture is shown in 4:3 format.

»Auto« format

The picture format is automatically switched to »16:9« for 16:9 programmes.

The picture format is automatically switched to »4:3« for 4:3 programmes.

»Overscan« format

In this mode, HD pictures are not cropped by the HDMI sockets or component sockets, and are displayed in their original size. This only applies in HDMI mode and for resolutions of 720p or above.

»16:9« and »14:9« formats

For programmes in 4:3 format, the picture is stretched horizontally if the »16:9« format or »14:9« format is selected.

The picture geometry is stretched horizontally.

With actual 16:9 input sources (from a set-top box on the SCART socket) the picture fills the screen completely and with the correct ­geometry.

»Subtitle« format

If you cannot see the subtitles at the bottom of the screen, select »Subtitle«.

»LetterBox« format

The letterbox format is especially suitable for programmes in 16:9 format.

The black borders which are usually at the top and bottom of the screen are eliminated, 4:3 pic- tures fill the screen.

The transmitted pictures are enlarged, but are slightly cropped at the top and bottom. The pic- ture geometry remains unchanged.

»Panorama« format

This setting is suitable for films in an especially wide format.

During programmes in 4:3 format, the picture is stretched horizontally if the »Panorama« function is selected. The picture geometry is stretched horizontally.

ENGLISH ­23