Grundig 26 VLE 7100 BF manual Headphones

Page 52

OPERATION USING EXTERNAL DEVICES------------------------------

... using the SCART socket ­ (FBAS/RGB signal)

7Suitable devices: Digital satellite receiver, DVD player/recorder, set-top box, games con-

sole, video recorder, decoder.

7Video signal: FBAS/RGB.

7Audio signal: stereo, analogue.

7»AV1« preset.

1 Connect the »AV1« socket on the television and the corresponding socket on the external device using a SCART cable (video and audio signal).

Activating a decoder

If a decoder is connected to the »AV1« socket, this must be activated to provide an unencrypted video/audio signal.

1Open the menu with »MENU«.

2Select »SETTINGS« with »V« or »Λ« and press »OK« to confirm.

– The »SETTINGS« menu appears.

3Select the »Decoder« with »V« or »Λ«.

4Activate the function with »<« or »>« (»On«).

5Press »MENU« to end the setting.

... with S-Video signal

7Suitable devices: DVD player/recorder, video recorder, camera recorder, notebook, PC.

7Video signal: Y/C.

7Audio signal: stereo, analogue.

7»S-VHS« preset.

1 Connect the »S-VHS« socket on the televi- sion and the corresponding socket on the ex- ternal device using an S-Video cable (video signal).

2Connect the »L R« sockets on the television to the corresponding sockets of the external device with RCA cables (audio signal).

­52 ENGLISH

... with an analogue TV signal

7Suitable devices: Digital satellite receiver, DVD player/recorder, set-top box, camera

recorder­ .

7Video signal: FBAS.

7Audio signal: stereo, analogue.

7»AV2« preset.

1Connect the »Video« socket on the television­ to the corresponding socket of the external­ device with an RCA cable (video signal).

2Connect the »L R« sockets on the television to the corresponding sockets of the external device with RCA cables (audio signal).

Note:

7There must not be a video signal at the »­ Video« and »S-VHS« socket at the same time. This could lead to picture disturbances.

Using a DVD player,

DVD ­recorder, video recorder ­ or set-top box

1Switch on the external device and select the function you wish to use.

2Press » «, use »V«, »Λ«, »<« or »>« to select the preset for the input signal (»AV1«, »AV2«, »S-VHS«, »HDMI1«, »HDMI2«, »HDMI3«, »HDMI4« or »Component«) and press »OK« to confirm.

Headphones

Connecting the headphones

1Plug the headphone jack (3.5 mm ø jack plug) into the headphone socket on the right side of the television.

Changing the headphone volume

1Open the menu with »MENU«.

2Select the menu item »SOUND SETTINGS« with »V« or »Λ« and press »OK« to con- firm.

–The »SOUND SETTINGS« menu ap- pears.

3Select the line »Headphone« with »V« or »Λ«.

Page 51 Page 53
Image 52
Page 51 Page 53
Contents LCD TV Setup and Safety General information SettingsConnection and preparation OverviewSpecial settings Operation with a Common Interface­4 English English ­5 General information Special features of your ­television setYou can record any digital TV channels you choose Receiving digital channels Important notes on environmental protectionConnecting the antenna and power cord Plug the power cord into a wall socketConnection and preparation ReceiveInserting batteries into the ­remote control Environmental notePb Pr Connections on the television setOptical Out PC Audio Controls on the television setVideo Remote control Main functions Navigation in the menusRemote control ­ All functionsInitial set-up and tuning ­television channels Selecting language, country and operating modeVarious settings HelpTuning terrestrial television channels DVB-T Tuning television channels from the cable provider DVB-CSelect the »Active Antenna Power« with »V« or »Λ« Start the scan with »« green»SOURCE SETUP« menu appears Signal appears­Changing the program table for the digital channels Selecting channel listsCreating lists of favourites Sorting channels in the favourite listDeleting channels Skipping channelsSetting­ on the right side Picture settingsAs from DVB-T receivers or DVD players­ Sound settings Exiting the setting SoundeffectsSRS TruSurround XT EqualizerBasic functions Eco mode Zoom functionZapping function Electronic TV guideChanging the picture format Wired network connection Wired network settingsNetwork connection Automatic connection»NETWORK SETTINGS« menu is displayed Manual connectionWireless network connection Wireless network settings Manual connection­28 English Select the Digital Media Server English ­29Start playback VTuner internet radioOther playback functions Information on recording and playing television programmes Possible limitations when using an external data mediumGrundig has no influence on ­ these restrictions Connecting external data media Settings for USB recordingSelecting the menu For example, external hard disksSwitching on automatic preview Testing the external data mediumSelecting external data media Selecting a partition on the external data medium″Pausing time shift ­ programmes Recording programmesOne-touch programme recording Medium­Using the electronic TV guide Presetting programmes to be recordedRecording a programme from the channel list Deleting a timer Editing recording data in the ­ timer menuBy manual data entry Playback Deleting programmes in the recording listFile formats Video dataAudio data Image data»USB« socket of the television set Connecting external ­ data mediaDevices­ in EN 55022/EN 55024 is not possible Settings in the USB ­ setup menu File browserSwitch to the folder/file list with »OK« Basic playback functionsAdditional playback ­ functions TOP text or Flof text mode Additional functionsOpening the Settings menu Language settingsSetting the date and time Timer settingsEntering the switch-off time ­ sleep timer Switch-on timerParental control settings Restoring the television to the default settings Updating softwareConvenience functions Changing the PIN code Locking television channelsDigi Link functions on your television Switching the device to standby Device operationHigh definition ­HD ready This ensures that you can view digital HdtvConnecting external devices With digital audio/video signalsWith analogue video signal­ progressive Presets »HDMI 1«, »HDMI 2«, »HDMI 3« or »HDMI4«Headphones Connecting the hi-fi system/­ AV receiver Setting the audio formatPlaying the audio signal via the ­ HiFi system Hi-fi system/AV receiverConnecting a PC Selecting presets for the PCSettings for PC mode Options »Auto Ajust« for automatic PC configura- tionWhat is a Common Interface? Access control for CI module and smart cardInserting the CA module Common Interface CI is an interface for DVB receivers»V« Select Line »Source«Select Option Searching for digital terrestrial TV channels automatically Searching for digital terrestrial TV channels manuallySwitching the television to ­analogue reception Tuning analogue television channels­Setting all analogue television channels To select the preferred setting­ Selection­ is still possible using the number ­buttons Changing stored analogue channels­Selecting a channel list Entering channel names 8 digit maximumExiting the settings Displaying signal information For digital channels only Open the menu with »MENU«Technical data Environmental note Service information for retailersRecycled Troubleshooting Problem Possible cause Remedy
Top Page Image Contents