Special
Changing stored analogue channels
If channels were stored with the automatic chan- nel search while tuning the television channels, you can delete them. You can also store chan- nels in a different preset, change or enter the name of a channel as well as skip channels.
Selecting a channel list
Note:
7Analogue channels can be selected if the option »Air« or »Cable« has been selected.
1Open the menu with »MENU«.
2Select the line »SOURCE SETUP« with »V« or »Λ« and press »OK« to confirm.
– The »SOURCE SETUP« menu appears.
3Select the line »Program Table« with »V« or »Λ« and press »OK« to confirm.
– The »PROGRAME TABLE« menu appears.
Note:
7Additional operations are explained in the following sections.
Deleting channels
1In the »PROGRAME TABLE« menu, select the television channel to be deleted with »V «, »Λ«, »<« or »>« and press »« (red) to con- firm.
2Press »« (yellow) to confirm the deletion process.
Note:
7»« (blue) allows all television channels to be deleted.
3Press »« (green) to confirm the deletion process.
Entering channel names (8 digit maximum)
1In the »PROGRAME TABLE« menu, select the
television channel with »V «, »Λ«, »<« or »>« and press »« (red) to confirm.
2 Mark the television channel with »« (green).
3Select the digits or letters with »Λ« or »V« and use »<« or »>« for the next position, and repeat the entry.
4Save the channel name with »« (green).
Note:
7If you wish to enter other channel names, repeat steps 1 to 4.
Skipping television channels
You can highlight television channels to be skipped when you select with »Λ« or »V«.
Selection is still possible using the number buttons.
1In the »PROGRAME TABLE« menu, switch over to the list view with »« (yellow).
2Select the preferred channel with »V« or »Λ«.
3Select the column »Skip« with »<« or »>« and use »OK« to mark the channel.
– The channel is marked using »✔«.
Note:
7Channels can also be reactivated. Select the channel with »V« or »Λ«, then select the column »Skip« and reactivate the channel with »OK«.
60 ENGLISH