Grundig 26 VLE 7100 BF manual Searching for digital terrestrial TV channels automatically

Page 57

Special settings----------------------------------------------------------------------------------------------------------

Searching for digital terrestrial TV channels automatically

1Open the menu with »MENU«.

2Select the line »SOURCE SETUP« with »V« or »Λ« and press »OK« to confirm.

– The »SOURCE SETUP« menu appears.

3 Select the line »Source« with »V« or »Λ« and press »OK« to confirm.

Select the option »Air« with »<«, »>«, »V« or »Λ« and press »OK« to confirm.

Caution:

7The antenna power supply (line »Active Antenna Power«) may only be switched on if the antenna is an active indoor antenna with a signal amplifier and it is not already

supplied­ with a voltage via a mains plug (or similar supply). Otherwise you may cause a short circuit and irreparably dam- age your antenna.

4Select the »Active Antenna Power« with »V« or »Λ«. Switch on the antenna power supply for the antenna with »<« or »>« (»On«).

5Select the line »Automatic Channel Search« with »V« or »Λ« and press »OK« to con- firm.

– The menu appears.

6Select the line »Country« with »V« or »Λ« and press »OK« to confirm. In the country

selection­ menu, select the country with »<«, »>«, »V« or »Λ« and press »OK« to confirm.

7Select the line »Scan Typ« with »V« or »Λ« and set the option »DTV« with »<« or »>«.

8Start the scan with »« (red).

–All channel and favourites lists will be

deleted­ and compiled anew.

Note:

7After starting the scan, a security query will appear. Press »« (green) to confirm the option »Yes«.

–The »Reults« menu appears, and the scan for TV channels begins. Depending on the number of television channels received, this can easily take a few minutes.

–The scan is complete as soon as the

»PROGRAM­TABLE« appears.

Note:

7You can abort the search by pressing »MENU«.

9Press »MENU« to end the setting.

Searching for digital terrestrial TV channels manually

1Open the menu with »MENU«.

2Select the line »SOURCE SETUP« with »V« or »Λ« and press »OK« to confirm.

– The »SOURCE SETUP« menu appears.

3Select the line »Source« with »V« or »Λ« and press »OK« to confirm.

Select the option »Air« with »<«, »>«, »V« or »Λ« and press »OK« to confirm.

Caution:

7The antenna power supply (line »Active Antenna Power«) may only be switched on if the antenna is an active indoor antenna with a signal amplifier and it is not already supplied with a voltage via a mains plug (or similar supply). Otherwise you may cause a short circuit and irreparably dam- age your antenna.

4Select the »Active Antenna Power«« with »V« or »Λ«. Switch on the antenna power supply for the antenna with »<« or »>« (»On«).

5Select » Digital Manual Tuning« with »V« or »Λ« and press »OK« to confirm.

– The menu appears.

6Enter the channel number directly with »1 ... 0« and press »OK« to confirm. –After the search is complete, the channels

found are displayed in the »Results« menu.

7Press »MENU« to finish the setting.

ENGLISH ­57

Page 56 Page 58
Image 57
Page 56 Page 58
Contents LCD TV Settings Setup and Safety General informationConnection and preparation OverviewOperation with a Common Interface Special settings­4 English English ­5 Special features of your ­television set General informationYou can record any digital TV channels you choose Important notes on environmental protection Receiving digital channelsPlug the power cord into a wall socket Connecting the antenna and power cordConnection and preparation ReceiveEnvironmental note Inserting batteries into the ­remote controlConnections on the television set Pb PrOptical Out Controls on the television set PC AudioVideo Navigation in the menus Remote control Main functionsAll functions Remote control ­Selecting language, country and operating mode Initial set-up and tuning ­television channelsVarious settings HelpTuning television channels from the cable provider DVB-C Tuning terrestrial television channels DVB-TSelect the »Active Antenna Power« with »V« or »Λ« Start the scan with »« greenSignal appears­ »SOURCE SETUP« menu appearsChanging the program table for the digital channels Selecting channel listsSorting channels in the favourite list Creating lists of favouritesDeleting channels Skipping channelsPicture settings Setting­ on the right sideAs from DVB-T receivers or DVD players­ Sound settings Soundeffects Exiting the settingSRS TruSurround XT EqualizerBasic functions Zoom function Eco modeZapping function Electronic TV guideChanging the picture format Wired network settings Wired network connectionNetwork connection Automatic connectionManual connection »NETWORK SETTINGS« menu is displayedWireless network connection Manual connection Wireless network settings­28 English English ­29 Select the Digital Media ServerVTuner internet radio Start playbackOther playback functions Possible limitations when using an external data medium Information on recording and playing television programmesGrundig has no influence on ­ these restrictions Settings for USB recording Connecting external data mediaSelecting the menu For example, external hard disksTesting the external data medium Switching on automatic previewSelecting external data media Selecting a partition on the external data mediumRecording programmes ″Pausing time shift ­ programmesOne-touch programme recording Medium­Presetting programmes to be recorded Using the electronic TV guideRecording a programme from the channel list Editing recording data in the ­ timer menu Deleting a timerBy manual data entry Deleting programmes in the recording list PlaybackVideo data File formatsAudio data Image dataConnecting external ­ data media »USB« socket of the television setDevices­ in EN 55022/EN 55024 is not possible File browser Settings in the USB ­ setup menuBasic playback functions Switch to the folder/file list with »OK«Additional playback ­ functions Additional functions TOP text or Flof text modeLanguage settings Opening the Settings menuTimer settings Setting the date and timeEntering the switch-off time ­ sleep timer Switch-on timerParental control settings Updating software Restoring the television to the default settingsConvenience functions Changing the PIN code Locking television channelsDigi Link functions on your television Device operation Switching the device to standbyThis ensures that you can view digital Hdtv High definition ­HD readyWith digital audio/video signals Connecting external devicesWith analogue video signal­ progressive Presets »HDMI 1«, »HDMI 2«, »HDMI 3« or »HDMI4«Headphones Setting the audio format Connecting the hi-fi system/­ AV receiverPlaying the audio signal via the ­ HiFi system Hi-fi system/AV receiver Selecting presets for the PC Connecting a PC Settings for PC mode Options »Auto Ajust« for automatic PC configura- tionAccess control for CI module and smart card What is a Common Interface?Inserting the CA module Common Interface CI is an interface for DVB receiversSelect Line »Source« »V«Select Option Searching for digital terrestrial TV channels manually Searching for digital terrestrial TV channels automaticallyTuning analogue television channels­ Switching the television to ­analogue receptionSetting all analogue television channels To select the preferred setting­ Changing stored analogue channels­ Selection­ is still possible using the number ­buttonsSelecting a channel list Entering channel names 8 digit maximumExiting the settings For digital channels only Open the menu with »MENU« Displaying signal informationTechnical data Service information for retailers Environmental noteRecycled Problem Possible cause Remedy Troubleshooting
Top Page Image Contents