Grundig 26 VLE 7100 BF manual Tuning analogue television channels­

Page 58

Special settings----------------------------------------------------------------------------------------------------------

Tuning analogue television channels­

This setting is only necessary if you cannot re- ceive any digital channels and you have not car- ried out an analogue search during initial setup. The television channels can be set directly or using the scan.

Switching the television to ­analogue reception

Note:

7Analogue channels can be selected if the option »Air« or »Cable« has been selected.

1 Open the »Select input source« menu with »

«.

2Depending on the antenna system, select the option »Air« or »Cable« with »V«, »Λ«, »<« or »>« as the input source and press »OK« to confirm.

Note:

7Additional operations are explained in the following sections.

Setting all analogue television channels

Analogue channels are displayed in the channel list after the digital channels.

Note:

7Plug the rooftop antenna cable (for analogue television channels) into the »ANT IN« socket on the television.

1Open the menu with »MENU«.

2Select the line »SOURCE SETUP« with »V« or »Λ« and press »OK« to confirm.

– The »SOURCE SETUP« menu appears.

3Select the line »Source« with »V« or »Λ« and press »OK« to confirm.

Select the option »Air« or »Cable« with »<«, »>«, »V« or »Λ« and press »OK« to con- firm.

4Select the line »Automatic Channel Search« with »V« or »Λ« and press »OK« to con- firm.

SOURECE SETUP

20.09.2010

15:46

SourceCabel

Automativ Channel Search

Digital Manual Tuning

Analogue Manual Tuning

Program Table

Signal Information

CA - Modul

Beenden

Zurück

5Select the line »Country« with »V« or »Λ« and press »OK« to confirm. In the country

selection­ menu, select the country with »<«, »>«, »V« or »Λ« and press »OK« to confirm.

6Select the line »Scan Typ« with »V« or »Λ« and set the option »ATV« with »<« or »>«.

7Start the scan with »« (red).

Note:

7After starting the scan, a security query will appear. Press »« (green) to confirm the option »Yes«.

All channel and favourites lists for the ana- logue channels will be deleted and com- piled anew.

The »Results« menu appears, and the scan for TV channels begins. Depending on the number of television channels received, this can easily take a few minutes.

The search is complete as soon as the »PRO- GRAM TABLE« appears.

Note:

7You can abort the search by pressing »MENU«.

8Press »MENU« to end the setting.

­58 ENGLISH

Image 58
Contents LCD TV Connection and preparation Setup and Safety General informationSettings OverviewSpecial settings Operation with a Common Interface­4 English English ­5 General information Special features of your ­television setYou can record any digital TV channels you choose Receiving digital channels Important notes on environmental protectionConnection and preparation Connecting the antenna and power cordPlug the power cord into a wall socket ReceiveInserting batteries into the ­remote control Environmental notePb Pr Connections on the television setOptical Out PC Audio Controls on the television setVideo Remote control Main functions Navigation in the menusRemote control ­ All functionsVarious settings Initial set-up and tuning ­television channelsSelecting language, country and operating mode HelpSelect the »Active Antenna Power« with »V« or »Λ« Tuning terrestrial television channels DVB-TTuning television channels from the cable provider DVB-C Start the scan with »« greenChanging the program table for the digital channels »SOURCE SETUP« menu appearsSignal appears­ Selecting channel listsDeleting channels Creating lists of favouritesSorting channels in the favourite list Skipping channelsSetting­ on the right side Picture settingsAs from DVB-T receivers or DVD players­ Sound settings SRS TruSurround XT Exiting the settingSoundeffects EqualizerBasic functions Zapping function Eco modeZoom function Electronic TV guideChanging the picture format Network connection Wired network connectionWired network settings Automatic connection»NETWORK SETTINGS« menu is displayed Manual connectionWireless network connection Wireless network settings Manual connection­28 English Select the Digital Media Server English ­29Start playback VTuner internet radioOther playback functions Information on recording and playing television programmes Possible limitations when using an external data mediumGrundig has no influence on ­ these restrictions Selecting the menu Connecting external data mediaSettings for USB recording For example, external hard disksSelecting external data media Switching on automatic previewTesting the external data medium Selecting a partition on the external data mediumOne-touch programme recording ″Pausing time shift ­ programmesRecording programmes Medium­Using the electronic TV guide Presetting programmes to be recordedRecording a programme from the channel list Deleting a timer Editing recording data in the ­ timer menuBy manual data entry Playback Deleting programmes in the recording listAudio data File formatsVideo data Image data»USB« socket of the television set Connecting external ­ data mediaDevices­ in EN 55022/EN 55024 is not possible Settings in the USB ­ setup menu File browserSwitch to the folder/file list with »OK« Basic playback functionsAdditional playback ­ functions TOP text or Flof text mode Additional functionsOpening the Settings menu Language settingsEntering the switch-off time ­ sleep timer Setting the date and timeTimer settings Switch-on timerParental control settings Convenience functions Changing the PIN code Restoring the television to the default settingsUpdating software Locking television channelsDigi Link functions on your television Switching the device to standby Device operationHigh definition ­HD ready This ensures that you can view digital HdtvWith analogue video signal­ progressive Connecting external devicesWith digital audio/video signals Presets »HDMI 1«, »HDMI 2«, »HDMI 3« or »HDMI4«Headphones Playing the audio signal via the ­ HiFi system Connecting the hi-fi system/­ AV receiverSetting the audio format Hi-fi system/AV receiverSettings for PC mode Connecting a PCSelecting presets for the PC Options »Auto Ajust« for automatic PC configura- tionInserting the CA module What is a Common Interface?Access control for CI module and smart card Common Interface CI is an interface for DVB receivers»V« Select Line »Source«Select Option Searching for digital terrestrial TV channels automatically Searching for digital terrestrial TV channels manuallySwitching the television to ­analogue reception Tuning analogue television channels­Setting all analogue television channels To select the preferred setting­ Selecting a channel list Selection­ is still possible using the number ­buttonsChanging stored analogue channels­ Entering channel names 8 digit maximumExiting the settings Displaying signal information For digital channels only Open the menu with »MENU«Technical data Environmental note Service information for retailersRecycled Troubleshooting Problem Possible cause Remedy