Grundig 26 VLE 7100 BF manual Manual connection, »NETWORK SETTINGS« menu is displayed

Page 25

HOME NETWORK-------------------------------------------------------------------------------------------------------------

7Press »« (green) to make sure that the network connection is established with the current settings.

–The messages »Testing ... Please waite« appears, after successfull announcement the messages »Connecting To Gateway: Successful« and then the MAC address.

8Press »MENU« to end the setting.

Manual connection

Certain networks require Static IP address. If your network requires a Static IP address, you must enter the »IP Address«, »Netmask«, »Gate- way« and »DNS« values manually. You can ob- tain your »IP Address«, »Netmask«, »Gateway« and »DNS« values from your Internet Service Provider (ISP).

1Open the menu with »MENU«.

2Select »CONNECTED APPS« with »V« or »Λ« and confirm with »OK«. Menu is displayed.

3Select »Network Settings« with »V« or »Λ« and confirm with »OK«.

– »NETWORK SETTINGS« menu is displayed.

CONNECTED APPS

NETWORK SETTINGS

Connection

Wired

Connection Type

Otomatik

Connection Settings

 

IP Address

192.168.1.100

Netmask

255.255.255.0

Gateway

192.168.1.1

DNS

192.168.1.1

4Select »Connection« with »V« or »Λ« and then select »Wired« with »<« or »>«.

5Select »Connection Type« with »V« or »Λ« and then select »Manual« with »<« or »>«.

–»IP Address«, »Netmask«, »Gateway« and »DNS« options are active.

6Select »IP Address« with »V«and press »OK«. Enter the IP address with »1…0« and press »« (green) to save the value.

7Select »Netmask« with »V« and press »OK«. Enter the Netmask with »1…0« and press »« (green) to save the value.

8Select »Gateway« with »V« and press »OK«. Enter the Gateway with »1…0« and press »« (green) to save the value.

9Select »DNS« with »V« and press »OK«. Enter the DNS address with »1…0« and press »« (green) to save the value.

10 Select »Connect« with »« (red) to establish the modem connection.

–The mesage »Testing ... Please waite« appears.

11 Press »« (green) to make sure that the network connection is established with the current settings.

–The messages »Testing ... Please waite« appears, after successfull announcement the messages »Connecting To Gateway: Successful« and then the MAC address.

12Press »MENU« to end the setting.

Exit

Connect

Back

 

Test

ENGLISH ­25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents LCD TV Settings Setup and Safety General informationConnection and preparation OverviewOperation with a Common Interface Special settings­4 English English ­5 General information Special features of your ­television setYou can record any digital TV channels you choose Important notes on environmental protection Receiving digital channelsPlug the power cord into a wall socket Connecting the antenna and power cordConnection and preparation ReceiveEnvironmental note Inserting batteries into the ­remote controlPb Pr Connections on the television setOptical Out PC Audio Controls on the television setVideo Navigation in the menus Remote control Main functionsAll functions Remote control ­Selecting language, country and operating mode Initial set-up and tuning ­television channelsVarious settings HelpTuning television channels from the cable provider DVB-C Tuning terrestrial television channels DVB-TSelect the »Active Antenna Power« with »V« or »Λ« Start the scan with »« greenSignal appears­ »SOURCE SETUP« menu appearsChanging the program table for the digital channels Selecting channel listsSorting channels in the favourite list Creating lists of favouritesDeleting channels Skipping channelsSetting­ on the right side Picture settingsAs from DVB-T receivers or DVD players­ Sound settings Soundeffects Exiting the settingSRS TruSurround XT EqualizerBasic functions Zoom function Eco modeZapping function Electronic TV guideChanging the picture format Wired network settings Wired network connectionNetwork connection Automatic connectionManual connection »NETWORK SETTINGS« menu is displayedWireless network connection Manual connection Wireless network settings­28 English English ­29 Select the Digital Media ServerStart playback VTuner internet radioOther playback functions Information on recording and playing television programmes Possible limitations when using an external data mediumGrundig has no influence on ­ these restrictions Settings for USB recording Connecting external data mediaSelecting the menu For example, external hard disksTesting the external data medium Switching on automatic previewSelecting external data media Selecting a partition on the external data mediumRecording programmes ″Pausing time shift ­ programmesOne-touch programme recording Medium­Using the electronic TV guide Presetting programmes to be recordedRecording a programme from the channel list Deleting a timer Editing recording data in the ­ timer menuBy manual data entry Deleting programmes in the recording list PlaybackVideo data File formatsAudio data Image data»USB« socket of the television set Connecting external ­ data mediaDevices­ in EN 55022/EN 55024 is not possible File browser Settings in the USB ­ setup menuBasic playback functions Switch to the folder/file list with »OK«Additional playback ­ functions Additional functions TOP text or Flof text modeLanguage settings Opening the Settings menuTimer settings Setting the date and timeEntering the switch-off time ­ sleep timer Switch-on timerParental control settings Updating software Restoring the television to the default settingsConvenience functions Changing the PIN code Locking television channelsDigi Link functions on your television Device operation Switching the device to standbyThis ensures that you can view digital Hdtv High definition ­HD readyWith digital audio/video signals Connecting external devicesWith analogue video signal­ progressive Presets »HDMI 1«, »HDMI 2«, »HDMI 3« or »HDMI4«Headphones Setting the audio format Connecting the hi-fi system/­ AV receiverPlaying the audio signal via the ­ HiFi system Hi-fi system/AV receiverSelecting presets for the PC Connecting a PCSettings for PC mode Options »Auto Ajust« for automatic PC configura- tionAccess control for CI module and smart card What is a Common Interface?Inserting the CA module Common Interface CI is an interface for DVB receivers»V« Select Line »Source«Select Option Searching for digital terrestrial TV channels manually Searching for digital terrestrial TV channels automaticallySwitching the television to ­analogue reception Tuning analogue television channels­Setting all analogue television channels To select the preferred setting­ Changing stored analogue channels­ Selection­ is still possible using the number ­buttonsSelecting a channel list Entering channel names 8 digit maximumExiting the settings For digital channels only Open the menu with »MENU« Displaying signal informationTechnical data Environmental note Service information for retailersRecycled Problem Possible cause Remedy Troubleshooting
Top Page Image Contents