Grundig 26 VLE 7100 BF manual Wireless network settings, Manual connection

Page 27

HOME NETWORK-------------------------------------------------------------------------------------------------------------

Wireless network settings

There are two ways of making the wireless net- work settings.

AAutomatic connection,

»Apart from Access Point Selection, all data regarding the connection settings (»IP Ad- dress«, »Netmask«, »Gateway« and »DNS«) are obtained from modem automatically.

BManual connection,

all connection settings (»IP Address«, »Net- mask«, »Gateway« and »DNS«) must be configured manually.

Automatic connection

Most of the home networks are Dynamic. If you have a dynamic network, you must use a DSL modem that supports DHCP. Modems and IP sharers that support DHCP obtain the »DNS« values that are required for »IP Address«, »Net- mask«, »Gateway« and internet access auto- matically, and thus you are not required to enter those values manually.

1Open the menu with »MENU«.

2Select »CONNECTED APPS« with »V« or »Λ« and confirm with »OK«. Menu is displayed.

3Select »Network Settings« with »V« or »Λ« and confirm with »OK«.

– »NETWORK SETTINGS« menu is displayed.

4Select »Connection« with »V« or »Λ« and then select »Wireless« with »<« or »>«.

5Select »Connection Type« with »V« or »Λ« and then select »Automatic« with »<« or »>«.

6Select »Select Access Point« with »V« or »Λ« and confirm with »OK«.

–»Select Access Point« menu appears and available wireless networks are scanned and displayed in the menu

7Select the network that you want to connect with »V«, »Λ«, »<« or »>« and confirm with »OK«.

–Wireless connection password screen is displayed.

8Select the required character with »V«, »Λ«, »<« and »>« and move to the next character with »OK«.

–Select »ABC« for uppercase and »abc« for lower case and confirm with »OK«.

–Select »?@123« for numbers and symbols and confirm with »OK«.

–Enter the password, select »Confirm« with »V«, »Λ«, »<« or »>« and confirm with »OK«.

Note:

7In WEP encryption system, more than one network password can be assigned for the network. Your television can only connect to network with level 1 password.

9Select »Connect« with »« (red) to establish the modem connection.

–The mesage »Testing ... Please waite« appears.

10 Press »« (green) to make sure that the network connection is established with the current settings.

–The messages »Testing ... Please waite« appears, after successfull announcement the messages »Connecting To Gateway: Successful« and then the MAC address.

11Press »MENU« to end the setting.

Note:

7If you do not have a dynamic network, follow the instructions in manual connection section.

ENGLISH ­27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents LCD TV Overview Setup and Safety General informationSettings Connection and preparationOperation with a Common Interface Special settings­4 English English ­5 Special features of your ­television set General informationYou can record any digital TV channels you choose Important notes on environmental protection Receiving digital channelsReceive Connecting the antenna and power cordPlug the power cord into a wall socket Connection and preparationEnvironmental note Inserting batteries into the ­remote controlConnections on the television set Pb PrOptical Out Controls on the television set PC AudioVideo Navigation in the menus Remote control Main functionsAll functions Remote control ­Help Initial set-up and tuning ­television channelsSelecting language, country and operating mode Various settingsStart the scan with »« green Tuning terrestrial television channels DVB-TTuning television channels from the cable provider DVB-C Select the »Active Antenna Power« with »V« or »Λ«Selecting channel lists »SOURCE SETUP« menu appearsSignal appears­ Changing the program table for the digital channelsSkipping channels Creating lists of favouritesSorting channels in the favourite list Deleting channelsPicture settings Setting­ on the right sideAs from DVB-T receivers or DVD players­ Sound settings Equalizer Exiting the settingSoundeffects SRS TruSurround XTBasic functions Electronic TV guide Eco modeZoom function Zapping functionChanging the picture format Automatic connection Wired network connection Wired network settings Network connectionManual connection »NETWORK SETTINGS« menu is displayedWireless network connection Manual connection Wireless network settings­28 English English ­29 Select the Digital Media ServerVTuner internet radio Start playbackOther playback functions Possible limitations when using an external data medium Information on recording and playing television programmesGrundig has no influence on ­ these restrictions For example, external hard disks Connecting external data mediaSettings for USB recording Selecting the menuSelecting a partition on the external data medium Switching on automatic previewTesting the external data medium Selecting external data mediaMedium­ ″Pausing time shift ­ programmesRecording programmes One-touch programme recordingPresetting programmes to be recorded Using the electronic TV guideRecording a programme from the channel list Editing recording data in the ­ timer menu Deleting a timerBy manual data entry Deleting programmes in the recording list PlaybackImage data File formatsVideo data Audio dataConnecting external ­ data media »USB« socket of the television setDevices­ in EN 55022/EN 55024 is not possible File browser Settings in the USB ­ setup menuBasic playback functions Switch to the folder/file list with »OK«Additional playback ­ functions Additional functions TOP text or Flof text modeLanguage settings Opening the Settings menuSwitch-on timer Setting the date and timeTimer settings Entering the switch-off time ­ sleep timerParental control settings Locking television channels Restoring the television to the default settingsUpdating software Convenience functions Changing the PIN codeDigi Link functions on your television Device operation Switching the device to standbyThis ensures that you can view digital Hdtv High definition ­HD readyPresets »HDMI 1«, »HDMI 2«, »HDMI 3« or »HDMI4« Connecting external devicesWith digital audio/video signals With analogue video signal­ progressiveHeadphones Hi-fi system/AV receiver Connecting the hi-fi system/­ AV receiverSetting the audio format Playing the audio signal via the ­ HiFi systemOptions »Auto Ajust« for automatic PC configura- tion Connecting a PCSelecting presets for the PC Settings for PC modeCommon Interface CI is an interface for DVB receivers What is a Common Interface?Access control for CI module and smart card Inserting the CA moduleSelect Line »Source« »V«Select Option Searching for digital terrestrial TV channels manually Searching for digital terrestrial TV channels automaticallyTuning analogue television channels­ Switching the television to ­analogue receptionSetting all analogue television channels To select the preferred setting­ Entering channel names 8 digit maximum Selection­ is still possible using the number ­buttonsChanging stored analogue channels­ Selecting a channel listExiting the settings For digital channels only Open the menu with »MENU« Displaying signal informationTechnical data Service information for retailers Environmental noteRecycled Problem Possible cause Remedy Troubleshooting
Top Page Image Contents