How to connect
Connect the audio and video cables from the external equipment's output jacks to the TV`s AV IN input jacks, as shown in the figure.
When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).
How to use
1.Select the input source by using the INPUT button on the remote control.
2. Operate the corresponding external equipment. Refer to external equipment operating guide.
How to connect
1. Connect the DVD video outputs (Y, Pb, Pr) to the COMPONENT (Y, Pb, Pr) IN jacks on the TV and connect the DVD
audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.
2.If your DVD only has an
outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.
NOTE: If your DVD player does not have component video output, use
How to use
1.Turn on the DVD player, insert a DVD.
2.Use the INPUT button on the remote control
to select YPbPr/YCbCr . (If connected to
3. Refer to the DVD player's manual for operating instructions.
Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Video output ports on DVD player
Owner 
s Manual 11