Adjustment Setup
Adjustment Setup
In VGA and DVI input mode , H Position and V Position can be used to adjust the picture position.
When VGA
DVI input mode is set
1.Press MENU button on the remote controller and then use the VOL+/- to select the ADJ.menu.
2.Press CH+/- to enter MENU of picture position setup
3.Press the VOL+ button and then use CH+/- button for desired adjust parameter option.
4.Press
VGA/DVI:
Display Mode Full Screen
Adjust
RGB
Reset
Auto Sync.
Color Temper | Standard |
Black Stretch | On |
A |
|
B |
|
C |
|
No selectable
Note:
Adjust, RGB and Reset are functional only under VGA and DVI mode, and Auto Sync is functional in VGA mode.
Display Mode
This will adjust the picture ratio.
Under the VGA signal, there are Full Screen , one to one and 4:3 mode for Display mode to select.
Under the AV1or
Under the DVI signal, there are Full Screen and 4:3 Mode for Display Mode to select.
H Size | 0 |
H Position | 0 |
V Size | 0 |
V Position | 0 |
Phase Adjust | 0 |
| |
A |
|
B |
|
C |
|
Adjust
this is opted for adjusting H Position and V Position as well as relative parameters in VGA and DVI modes.(Phase Adjust is not available in DVI)
RGB
this is opted for adjustment of the numerical value of red, green and blue in VGA/DVI mode.
Reset
this is opted for initialization adjustment of parameters (After the operation, Complete will be on the right of the option)
Auto sync
this is opted for adjustment of picture location frequency and phase parameters in VGA mode. (Not available in DVI)
( After the operation, Complete will be on the right of the option.)
Color temperature
This will increase or decrease Warm (red) and Cold (blue) colors to suit personal preferences.
Select Cold to give the white colors a blue tint, Standard to give the white colors a neutral tint, Warm to give the white colors a red tint.
Red | 0 |
| |
|
|
Green | 0 |
| |
|
|
Blue | 0 |
A
B
C
22 Plasma TV