No picture & No sound
Check whether the TV is turned on from both front button and t he back switch.
Is the power cord inserted into wall power outlet?
Test the wall power outlet, plug another product`s power cord into the outlet where the TV`s power cord was plugged in.
Picture OK & |
| Press the VOL+ button. |
|
| |
No sound |
| Sound muted? Press MUTE button. |
| ||
| ||
|
|
|
|
|
|
The remote control doesn`s work
Check to see if there is any object between the TV and the remote control causing obstruction.
Are batteries installed with correct polarity (+ to +, - to
Correct remote operating mode set: VCR etc.?
Install new batteries. (Refer to p.8)
Picture appears slowly |
|
| This is normal, the image is muted during the display startup process. Please | |
|
| |||
after switching on | contact your service center, if the picture has not appeared after five minutes. | |||
|
|
|
|
|
|
|
|
|
|
Select Color Temperature in the ADJ menu and press the VOL+/- button.
No or poor color
or poor picture |
| Keep a sufficient distance between the TV and the VCR. |
| Activate any function to restore the brightness of the picture. | |
|
| |
|
| |
|
| |
|
|
|
|
|
|
Horizontal/vertical bars
or picture shaking
Check for local interference such as an electrical appliance or power tool.
No output from one of |
| Adjust Balance in the SOU. menu. (Refer to p.21) |
| ||
the speakers |
|
|
|
|
|
|
|
|
A change in ambient humidity or temperature may result in an unusual noise
Unusual sound from when the plasma display is turned on or off and does not indicate a fault with it.. inside the TV
30 Plasma TV