Fine Tune

System Menu

If the picture and/or sound are poor, try using the fine tune feature. Do not use this feature unless reception is poor.

1 Repeat step 1-2, then press CH+/- buttons to select "Fine Tune" item.

2 Press VOL-/+ buttons repeatedly to carry out fine tune, till the best

picture and sound are obtained, then loosen the button.

Color Sys.	AUTO
Sound Sys.	M/N
Fine Tune	49.75MHz
Skip	Off
Channel Type	Cable
CATV Type	STD
Auto Scan
Prog. Switch
A
B
C

Color System

Usually this should be set in the auto position. However if the color displayed on the screen are incorrect, you can manually select the correct color system. Press MENU and then VOL+/- button, till the picture menu shown on the

right will display on the screen.

Press CH+/- buttons to select "Color Sys.", then press the VOL-/+ buttons to select the correct color system. In general, you can set it as "AUTO".

Color Sys.	AUTO
Sound Sys.	M/N
Fine Tune	49.75MHz
Skip	Off
Channel Type	Cable
CATV Type	STD
Auto Scan
Prog. Switch
A
B
C

Skip

After the programs are presetting, you can skip some programs so that to select your favorite channels only.

1. Press CH+/- button or Direct-digit choosing button to select a channel directly.

2.Press MENU and then use VOL+/- button to select the SYS. Menu.

3.Press CH+/- buttons to select "Skip" item.

4. press VOL-/+button to set Skip as On.

5. When you are satisfied with your choice, press MENU button to return to the previous menu or press EXIT button to return to TV viewing.

If you want to recover the skipped channel

1.Use Direct-digit Choosing button to select the number of the channel to be recovered.

2.Do the above steps again.

3.Press VOL+/- button to set Skip as Off.

Color Sys.	AUTO
Sound Sys.	M/N
Fine Tune	49.75MHz
Skip	Off
Channel Type	Cable
CATV Type	STD
Auto Scan
Prog. Switch
A
B
C

Prog.Switch

1.Press MENU and then use VOL+/- button to select the SYS. Menu. 2. Press CH-/+ button to select Prog.Switch.

3.Press VOL+ to enter the submenu, and press the digital button to set the desired channel number,

Press CH+ button to To Prog item, and Press the digital button to set the exchange channel number, press CH+ button to Switch, then press VOL+ button to confirm.

4. When you are satisfied with your choice, press MENU button to return to the previous menu or press EXIT button to return to TV viewing.

Current Prog	000
To Prog	001
Switch

Owner s Manual 19