System Menu
This TV set has three methods to set channels, which are respectively Automatic search, manual search fine tune. In this section, how to use the remote control to set channel is explained. You can also use
buttons on the TV set to set channel.
Channel Type
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1 Press MENU button and then use VOL+/- button to select the SYS. Menu.
2 Press CH+/- buttons to select "Channel Type" item. |
| Color Sys. | AUTO | |||||
3 Press VOL+ button to select Cable or Air item. |
| |||||||
| Sound Sys. | M/N | ||||||
|
|
| Fine Tune | 49.75MHz | ||||
|
|
| Skip | Off | ||||
|
| |||||||
| When Air is selected, the TV will detect antenna signals and will search |
| Channel Type | Cable | ||||
| for antenna TV (NTSC and ATSC) channels available in your local area. |
| CATV Type | STD | ||||
| When Cable is selected, the TV will detect cable company supplied |
| Auto Scan |
|
|
| ||
| signals and will search for cable TV (NTSC,ATSC, QAM modulated) |
| Prog. Switch |
|
|
| ||
| channels available in your area. |
|
|
|
|
|
|
|
| Make sure that registration with your cable TV provider and connection |
| A |
|
|
| ||
|
| B |
|
|
| |||
|
|
| C |
|
|
| ||
| of equipment are completed. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| When Air and Cable are selected, the TV will detect the antenna |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| signals and cable company supplied signals, and search for the |
| Note : the tuning menu will be | |||||
| antenna TV and cable TV channels available in your area. |
| only operated in normal TV mode. | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CATV Type
1 Press MENU button and then use VOL+/- button to select the SYS. Menu. 2 Press CH+/- buttons to select "CATV Type" item.
3 Press VOL+ button to select STD, IRC or HRC item.
Note: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.
Automatic Scan
1 Press MENU button and then use VOL+/- button to select the SYS. Menu.
2 Press CH+/- buttons to select "Auto Scan" item.
3 Press VOL+ button to ensure automatic search function work.
4 Press MENU button to stop automatic search function.
After the search has finished, all channels now playing program will be automatically preset in order.
Color Sys. | AUTO |
Sound Sys. | M/N |
Fine Tune | 49.75MHz |
Skip | Off |
Channel Type | Cable |
CATV Type | STD |
Auto Scan |
|
Prog. Switch |
|
A |
|
B |
|
C |
|
18 Plasma TV