Haier 42EP24STV owner manual Ant

Page 10

-To avoid picture noise (interference), leave an adequate distance between the VCR and TV

Do not leave a still picture from a VCR on the screen for a long If the 4:3 format is used, the fixed images on the sides of the screen may remain visible on the screen, if this format is used day after day. This is known as burn-in, is uneven wear of the screen area. Reduce contrast when displaying fixed images on the screen for a long

1. Connect the audio and video cables from the VCR's output jacks to the TV input jacks,

as shown in the figure.

When connecting the TV to VCR, match

the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

If you connect an S-VIDEO output from VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input.

2. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner`s manual.)

3. Select the input source by the INPUT button on the remote control.

Do not connect to both Video and S-Video at the same In the event that you connect both Video and the S-Video cables, only the S-Video will work. So you should not connect to S-Video if you want to use Video.

it

ANT IN

- After subscribing to a cable TV service from a local provider you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV.

- For further information regarding cable TV service, contact your local cable TV service provider(s).

1. Connect the co-axial cable from antenna out of the cable box to antenna in of the TV.

2. Connect the audio and video cables from the Cable Box's output jacks to the TV`s AV IN input jacks, as shown in the figure.

When connecting the TV to a Cable Box, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

(If you have a digital cable box please refer to page 12 , for DTV setup)

3. Select the input source by using the INPUT button on the

remote control. (If connected to AV IN, select AV1/S-VIDEOinput source) 4. Select your desired channel with the remote control for cable box.

ANT IN

(Co-axial)

10 Plasma TV

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Plasma TV OWNER`S Manual FCC Statement Important Safety Instructions Model number Serial number Date of purchase Setup and Operation Checklist Front panel controls Real panel controls Function introduction DigitsConnecting block GroundingANT How to connect Digital Set-top Box How to connect Install the Speakers ST4X16 screwInstall the Pmma Baffle Install the brace poleTurning on the TV Sleep Timer Sound ModePicture Mode Operation MenuSystem Menu Press VOL+ button to select Cable or Air itemIf you want to recover the skipped channel Fine TunePicturei Qualityli Adjustj Sound adjustment Display Mode Adjustment SetupAdjustment Setup Color temperatureFunctioni Setup Parental Using Closed CaptionsClose Caption Chip rating and categoriesTV Rating Children TV Rating GeneralOff/On Time Time SetupClock Setting Remind Time/Remind ProgTuning Lock Lock SetupChange Password Preset ProgSource Lock Max VolumeProg.Num Child LockDefault Auto Sync Color Temper Standard Black Stretch ModePicture OK Owner s Manual Model V0.1 0090506987
Top Page Image Contents