Install the Speakers
1 Face the PDP screen upside down on a clean blanket or a bracket and pay attention not to indent the casing. Lay the two speaker aside of the PDP.
2 | . Fix 4 ST4X16 screws to the speaker. (position , , and in Figure ) |
3 | . Lean the speaker against the plasma screen, ensuring that the screw holes on the connecting block in |
line with the screw holes on the plasma screen, and hold the speaker. (position I, II, III and IV in Figure )
4. Fix the speaker to the plasma screen with ST4X16 screws.
5. Connect the speaker to the speaker terminal of plasma screen: Nip the speaker terminal and insert the connecting cable into the terminal slot. Release the speaker terminal and ensure that the white connecting cable is inserted in the terminal slot marked red and black connecting cable is inserted in the black terminal slot, and that anode and cathode poles are correctly connected.
(See Figure )
ST4X16 screw
EXT SPEAKER
RL
ST4X16 screw
14 Plasma TV