*In this manual, the OSD (On Screen Display) may be different from your TV`s, because it is just an example to help you with the TV operation.
TV
Turning on the TV just after installation.
1. Connect power cord correctly.
2.Press the SWITCH button on back of the TV. At this moment, the TV is switched to standby mode.
Press the POWER button on the remote control or button on the TV and then the TV will turn on.
Turning on the TV
1. If the TV was turned off with the SWITCH button on the TV Press the SWITCH button on the TV to turn the TV on.
2. If the TV was turned off with the remote control and then the ON/OFF switch on the back of the TV.
Press the SWITCH button on the back of TV and then press the POWER button on the remote control to turn the TV on.
NOTE
If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
Choose the Menu Language
When you start using your set for the first time, you must select the Menu Language which will be used for displaying menus and indications.
1 Press MENU and then use VOL+/- button to select the FUN. Menu.
2Press
3 Select a particular Menu Language by pressing VOL+/- button repeatedly. You can choose one of three Menu Languages. (English, French, Spanish)
4 When you are satisfied with your choice, press the EXIT button to return to normal viewing.
Menu Language | English |
OSD Timeout | 15seconds |
Menu Background | Translucent |
Calendar |
|
Auto Off | Off |
BlueScreen | Off |
Close Caption | Off |
Parental |
|
A |
|
B |
|
C |
|
Choose the Input Source
-Change the picture source so that you can watch your TV, cable TV, VCR, DVD, or any other devices that are connected to your TV.
1. Press INPUT button on the remote controller, the Scoure menu will appear on the screen. | Source |
| |
2. Press | TV |
| |
Note: | YPbPr/YCbCr |
| |
If AV1 and | VGA |
| DVI |
16 Plasma TV