How to connect

1. To get the best picture quality, adjust the PC graphics card, if necessary.

2. Use the TV`s VGA IN or DVI (Digital Visual Interface) IN port for video connections, depending on your PC connector.

If the graphic card on the PC does not output analog or digital RGB simultaneously, connect only one of either VGA IN or DVI IN to display the PC on the TV.

If the graphic card on the PC does output analog and digital RGB simultaneously, set the display to either VGA or DVI; (the other mode is set to Plug and Play automatically by the display.)

3. Then, make the corresponding audio connection. If using a sound card, adjust the PC sound as required.

How to use

1. Turn on the PC and the TV.

2.Turn on the display by pressing the POWER button on the TV's remote control.

3.Use INPUT on the remote control to select VGA, or DVI source.

4.Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or

brightness in PC mode. If noise is present, change the PC mode to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on MENU until the picture is clear. If the refresh rate of the PC graphic card can not

be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.

NOTES:

Use a DVI cable.

Avoid keeping a fixed image on the TV's screen for a long period of The fixed image may become permanently imprinted on the screen. Use a screen saver when possible.

The synchronization input form Horizontal and Vertical frequencies are separate.

Owner s Manual 13