Symphonic CSDV840E Hint for Timer Recording, Copying a Video Tape, Recording speed SP/SLP

Page 13

Hint for Timer Recording

•If there is a power failure or the DVD/VCR has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.

•If a tape is not in the DVD/VCR or does not have the record tab, the TIMER REC light flashes and timer recording cannot be performed. Please insert a recordable tape.

•If a tape ends during timer recording, the VCR will stop, eject the tape, and switch to the DVD mode automati- cally as the TIMER REC light flashes. (If the DVD power is off, the VCR will become STANDBY status).

•When all timer recordings are finished, the TIMER REC light will flash.

•When timer recordings are set, the TIMER REC light will appears. To use the VCR as usual until the time for the recording, press the SUBTITLE/T-SET button so that the TIMER REC light disappears. Press the VCR/TV button to choose the VCR position. Select either VCR or DVD mode, then continue with the other features as described in this manual.

If you want to use the DVD player during a VCR timer recording or while the TIMER REC light is on or flashes.

•You can use the DVD player while the TIMER REC light is on or flashes, or during a timer recording. Press the POWER button to turn on the DVD. Press the DVD button on the remote control to choose DVD mode, then continue with the other DVD features as described in this manual. You don’t have to set the TIMER off to use the DVD only.

Copying a Video Tape

Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.

 

 

(Back of TV) 1)

Insert a pre-recorded tape into the playing VCR.

(Back of another source)

(Back of Recording DVD/VCR*)

2)

Insert a tape with its record tab into the recording

 

DVD/VCR.

 

 

 

 

AUDIO OUT

AUDIO IN

 

 

DVD

 

DVD/VCR VCR

 

 

3) Press the SPEED button on the remote control

 

DVD/VCR VCR

 

 

 

 

 

 

 

Connect

of the recording DVD/VCR to select the desired

 

 

 

 

 

L

COMPONENT

 

AUDIO IN

 

or

AUDIO OUT

1

DIGITAL

AUDIOS-VIDEO

VIDEO OUT

AUDIO OUT

 

ANT-IN

2

 

L

L

AUDIO OUT

OUTOUT

Y

L

 

 

 

R

R

R

Connect

R

CB

R

R

ANT-OUT

 

recording speed (SP/SLP).

VIDEO OUT

ANT-OUT

COAXIAL

 

VIDEO OUT

VIDEO IN

 

 

VIDEO OUT

VIDEO IN

 

 

 

 

 

 

 

 

 

 

CR

4)

Select the "L1" or "L2" position on the recording

 

RF cable

Audio/Video cables

(supplied)

 

DVD/VCR.

*Front input jacks are also available

 

• To use the input jacks on the back of this unit,

(not supplied)

 

 

 

 

select "L1" position by pressing [0], [0], [1] on

Hint

 

 

the remote control or the CHANNEL buttons.

 

 

• To use the input jacks on the front of this unit,

 

 

 

• For best results during dubbing, use the front panel controls whenever

 

select "L2" position by pressing [0], [0], [2] on

possible. The remote control might affect another source’s operation.

 

the remote control or the CHANNEL buttons.

• Always use video-quality shielded cables with RCA-type connectors.

5)

Press the REC/OTR button on the recording

Standard audio cables are not recommended.

 

DVD/VCR.

• You can use a video disc player, satellite receiver, or other audio/video

 

6)

Begin playback of the tape in another source.

component with A/V outputs.

 

• “L1” or “L2” is found before the lowest memorized channel. (Example:

7)

To stop recording, press the STOP/EJECT button

CH02)

 

 

on the recording DVD/VCR, then stop playback of

• “L2” input jacks are on the front of this DVD/VCR.

 

the tape in another source.

VCR Functions

– 13 –

EN

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Table of Contents Supplied AccessoryBasic TV Connection Laser Safety PrecautionsMake your contribution to the environment Important Safeguards Maintenance Installation LocationAvoid the Hazards of Electrical Shock and Fire Moisture Condensation WarningConnections Setup About the Video Cassettes and DiscsHint Connection to an Audio System Hint for Cable Box or Satellite BoxDigital audio input jack AnalogFront & Rear Terminals Connection to a TVMethod Remote Control About the Remote Control and Front PanelInstalling the Batteries for the Remote Control Front Panel Display VCR/DVD SwitchingClock Set Up Preset for UseTurn on the unit for the first time Recording & OTR One Touch Recording VCR Functions PlaybackOther Operations Timer Recording Recording FeaturesTo Check, Correct, or Cancel a Timer Program On-Screen OperationsPress the Speed button on the remote control Hint for Timer RecordingCopying a Video Tape Recording speed SP/SLPHint for Timer Search & Index Search Special FeaturesTime Search Index SearchDVD Functions Playback On-Screen Display MP3 PlaybackSearch Function Marker SetupRepeat Playback Repeat / Random / Programmed PlaybackRepeat A-B Playback Random PlaybackSpecial Settings Quick Setup Menu DVD Set UpLanguage Setting Custom MenuAudio Setting Display SettingParental Setting To Change the Password for Parental ControlsIf you have set a password already Parental LevelsTo switch the mode Information Troubleshooting GuideTry other DVD features Green VCR Output light is litFunai Corporation Limited Warranty SpecificationsLanguage List For the Remote Control Installing the BatteriesVCR/DVD Switching Quick Use GuideAble are set to the correct channel VCR Playback DVD/CD Playback0VMN04128 / H9611CD If channel 3 is already occupied for broadcasting, see RFTable des matières Accessoires fournisRaccordement de base à un téléviseur Lire avant l’utilisation de l’appareilSécurité concernant le laser PrécautionsProtection de l’environnement Accessoires risque dêtre dangereuse Accessoires Nutiliser que les accessoires recomConserver CE Guide Dutilisation Les instruc Tions relatives au fonctionnement et à la sécurité doiventÉviter les risques d’électrocution et d’incendie Emplacement d’installationPropos du copyright EntretienRaccordements Configuration Propos des disques et des cassettes vidéoConseil Raccordement à un système audio Bornes avant & arrière Raccordement à un téléviseurMéthode Télécommande Propos de la télécommande et du panneau avantMise en place des piles de la télécommande TélécommandeRemarque Affichage du panneau avantPremière mise sous tension de l’appareil PréréglagesRéglage de l’horloge Enregistrement & OTR enregistrement instantané Fonctions de magnétoscope Lecture normaleAutres opérations Fonctions d’enregistrement Opérations à l’écranEnregistrement avec minuterie Magnétoscope Fonctions deCopie d’une vidéocassette Conseils pour lenregistrement avec minuterieFonctions de Magnétoscope Conseil à propos de la recherche horaire & par index Fonctions spécialesRecherche horaire Recherche par indexFonctions DVD Lecture Informations affichées à l’écran Lecture MP3Conseils Fonction de recherche Configuration des marqueursLecture à répétition Lecture à Répétition / Aléatoire / ProgramméeRépétition A-B Lecture programméeRéglages spéciaux Mode de son ambiophonique virtuelExemple Angle de la caméraMenu CONF. RAP Configuration DVDMenu Personnal Réglage de la LangueRéglage Audio Réglage de l’AFFICHAGEMenu SON Pour quitter ce menuChangement du mot de passe du blocage parental Contrôle parentalRéglage du Blocage Parental Menu ParentInformations Guide de dépannage Liste des langues Caractéristiques techniquesGarantie Limitée Société Funai Guide d’utilisation rapide De la télécommandeRaccordements Mise en place des pilesH9611CD Lecture normale sur le magnétoscopeSi la chaîne 3 est utilisée, consulter le paragraphe Chaîne

CSDV840E specifications

The Symphonic CSDV840E is an innovative and versatile digital video recorder designed for both commercial and residential use. Built with cutting-edge technology, this device combines reliability with advanced features aimed at providing superior performance in video surveillance.

One of the standout characteristics of the CSDV840E is its high-definition recording capability. It supports multiple video formats including 1080p, ensuring that users receive crisp and clear footage. This feature is essential for security applications where detail is critical. Additionally, the device offers a robust storage solution, accommodating a substantial amount of footage without the need for frequent data management.

The innovative technology embedded within the CSDV840E includes support for H.265 compression, allowing for significant reduction in file sizes without compromising video quality. This means that users can store more footage for longer periods, effectively maximizing their recording capacity. The device also features multiple recording modes, including continuous, motion detection, and scheduled recording, providing flexibility to meet various surveillance needs.

In terms of connectivity, the CSDV840E comes equipped with Ethernet support, enabling remote access to the system through various devices, including smartphones and tablets. This remote viewing capability allows users to monitor their premises in real-time, a vital feature for businesses looking to enhance security.

Furthermore, the CSDV840E is designed with user-friendliness in mind. Its intuitive interface simplifies operation, allowing users of all technical backgrounds to navigate settings and options easily. The device also offers playback functionality, enabling quick reviews of recorded footage, which is particularly useful in situations requiring immediate access to information.

Durability and reliability are key components of the Symphonic CSDV840E. Constructed with high-quality materials, the device is built to withstand various environmental conditions, making it suitable for both indoor and outdoor installations.

Ultimately, the Symphonic CSDV840E stands out as a comprehensive solution for anyone looking to enhance their video surveillance system. With its combination of high-definition recording, advanced compression technology, remote access capabilities, and user-friendly design, it sets a new standard in the digital video recorder market. Whether for personal use or professional application, the CSDV840E delivers high performance and dependability that users can trust.
Top Page Image Contents