Sharp PNE702, PN-E702 Connecting Peripheral Equipment, Connection with a PC or AV equipment

Page 12

Connecting Peripheral Equipment

When the PN-ZB01 (optional) is attached

 

6

 

 

14

 

 

12

 

 

13

 

11

 

1

8

7

2

 

9

 

3

 

10

 

4

 

5

5

Caution

•Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the manual of the equipment to be connected.

•Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables connected to the input and output terminals may cause malfunctions and the other problems.

TIPS

•Images may not be displayed properly depending on the computer (video card) to be connected.

•A screen with 1920 x 1080 resolution may not be displayed correctly on PC RGB. In this case, check the settings of your computer (video card) to verify that input signals conform to specifications of this monitor. (See page 54.)

•If there is a check box to disable EDID in display control panel, check it when using PC RGB.

•Use the automatic screen adjustment when a PC screen is displayed for the first time using PC D-SUB or PC RGB, or when the setting of the PC is changed. The screen is adjusted automatically when SELF ADJUST in the OPTION menu is set to ON.

•If the audio output from the playback device is connected directly to speakers or other devices, the video on the monitor may appear delayed from the audio portion. Audio should be played through this monitor by connecting the playback device to the monitor’s audio input, and connecting the monitor’s audio output to the speakers or other devices.

•The audio input terminals used in each input mode are factory-set as follows.

Input mode

Audio input terminal

(Factory setting)

 

PC D-SUB, PC DVI-D, PC RGB

Audio input terminal

AV DVI-D

Audio1 input terminal

AV component (BNC),

Audio2 input terminal

AV S-video , AV video (BNC)

AV COMPONENT (D-SUB),

Audio input terminal

AV video (D-SUB)

 

PC HDMI, AV HDMI

PC/AV HDMI input terminal

Connection with a PC or AV equipment

1. PC/AV HDMI input terminal

•Use a commercially available HDMI cable (conforming to the HDMI standard).

•Set HDMI of INPUT SELECT on the OPTION menu according to the device to be connected.

•Select the audio input terminal to be used in PC HDMI or AV HDMI of AUDIO SELECT on the OPTION menu. When HDMI is selected, connection to the audio input terminal is unnecessary.

2. PC D-sub input terminal

•Set D-SUB of INPUT SELECT on the OPTION menu according to the device to be connected.

•Common terminal for AV COMPONENT and AV VIDEO.

•When the PN-ZB01 (optional) is attached, select the audio input terminal to be used in PC D-SUB of AUDIO SELECT on the OPTION menu.

•To use with AV VIDEO (D-SUB), connect the green terminal to the device’s video output.

3. Audio input terminal

•Use an audio cable without resistance.

•When the PN-ZB01 (optional) is attached, set the audio input terminal used for each input mode in AUDIO SELECT on the OPTION menu.

4. Audio output terminals

•The output sound varies depending on the input mode.

•The volume of the output sound can be fixed by setting AUDIO OUTPUT (RCA) on the OPTION menu.

•It is not possible to control the sound output from the audio output terminals with the AUDIO menu.

5. RS-232C input terminal RS-232C output terminal

•You can control the monitor from a PC by connecting a commercially available RS-232 straight cable between these terminals and the PC.

E12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents PN-E702 For Customers in U.K GREEN-AND-YELLOWBlue BrownRefer Servicing to Qualified Service Personnel Important InformationInformation on Disposal for Users private households Information on Disposal for Business UsersEuropean Union Other Countries outside the EUDear Sharp Customer Safety Precautions Tips and Safety Instructions For the monitor in landscape orientation For the monitor in portrait orientationDo not place the monitor on a device which generates heat Contents Supplied ComponentsPart Names NFront viewNRear view NRemote control unit Part Names Signal transmitterPower button See Mute button See 11 EConnecting Peripheral Equipment Connection with a PC or AV equipmentConnecting Peripheral Equipment 13 EConnecting the Power Cord Binding CablesRemoving the Handles Handles can be removedPreparing the Remote Control Unit Installing the batteriesRemote control operation range 15 ETurning Power On/Off Turning on the main powerTurning power on/off Main power switchDisabling power on/off operations NOperation modeNDate/time setting Turning Power On/OffBasic Operation MuteMenu DisplayBasic Operation NSwitching the screen size 19 EWide Zoom Normal Dot by DotMenu Items Displaying the menu screenNExample of operation NMenu screen display21 E Menu item detailsNSCREEN Menu Items NPICTURENSETUP Menu ItemsNAUDIO 23 E NOPTIONNMULTI 25 E NPIP/PbyPMenu Items NDual screen display NZOOM2 Special Setting Setting procedureSet using the Multi menu Menu Items NEnlargePower 27 ENSCHEDULE DAY of the WeekAdjustments for PC screen display NAutomatic adjustmentNScreen display for adjustment 29 E Communication procedure Controlling the Monitor with a PC RS-232CPC connection Communication conditions31 E NResponse code formatNID numbers 002 VOLM0030VOLM0020 ← OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←Setting of the Gamma user data 33 ERS-232C command table Power control/Input mode selectionHow to read the command table Command Command field See Direction35 E Controlling the Monitor with a PC RS-232C Screen menuControlling the Monitor with a PC RS-232C Picture menu Setup menu 37 EControlling the Monitor with a PC RS-232C Audio menu Controlling the Monitor with a PC RS-232C Option menu Image Position Epos setting 39 EControlling the Monitor with a PC RS-232C Multi menu Landscape orientation Portrait orientationInitialization/Functional Restriction Setting Function menu Controlling the Monitor with a PC RS-232C PIP/PbyP menuCommands for setting of the Gamma user data 41 EControlling the Monitor with a PC RS-232C Others Settings to connect to a LAN Controlling the Monitor with a PC LANTo set on the monitor Default Gateway 0.0 43 ETo set from a PC Controlling the Monitor with a PC LANSee pages 45 to 49 for details on each setting Controlling with a PCBasic operation If the Dhcp Client is set to OFF, specify an IP addressStandby mode, Power on is the operation available 45 EInformation about this monitor appears User Name / Password If the Dhcp Client is set to OFF, specify the subnet maskDNS Server Accept IP Address47 E Attach the log file to a TEMPERATURE/HARDWARE error e-mail Recipient E-MAIL AddressesCondition Confirmation49 E Troubleshooting Troubleshooting 51 ESpecifications NProduct SpecificationsNDimensional Drawings Specifications NPower management53 E NDDC plug and playSpecifications NCompatible signal timing PC NCompatible signal timing AV55 E Mounting Precautions For Sharp dealers and service engineers PN-E702 Me EN11K1
Top Page Image Contents