Sharp PNE702, PN-E702 operation manual Menu Items, Naudio, Nsetup

Page 22
MENU .

Menu Items

USER

Adjusts each item when the WHITE BALANCE is set to

USER.

 

R-CONTRAST

Adjusts bright-toned red component.

G-CONTRAST....

Adjusts bright-toned green component.

B-CONTRAST

Adjusts bright-toned blue component.

R-OFFSET

Adjusts dark-toned red component.

G-OFFSET

Adjusts dark-toned green component.

B-OFFSET

Adjusts dark-toned blue component.

COPY TO USER

Copies the value of white set for PRESET to the USER setting.

Select “ON” and then press MENU .

(In the case other than white, color tone may differ from the PRESET.)

GAMMA

Selects the gamma. USER sets the gamma to the sent value (see page 33). (In PIP mode, the main side setting is reflected in the image.)

DISPLAY COLOR PATTERN

Displays a color pattern. Can be displayed while the menu screen is displayed, so you can refer to the pattern while adjusting the image.

OFF

No pattern display.

WHITE

White single color pattern display.

RED

Red single color pattern display.

GREEN

Green single color pattern display.

BLUE

Blue single color pattern display.

USER

Red/green/blue mixed color pattern display.

 

When USER is selected, set each color’s

 

level.

RESET

Resets the values of the PICTURE menu items to the factory preset values.

Select “ON” and then press

nAUDIO

TREBLE

Adjusts the volume of treble-level sound.

BASS

Adjusts the volume of bass-level sound.

BALANCE

Adjusts the balance of the audio sound between right and left.

RESET

Resets the values of the AUDIO menu items to the factory preset values.

Select “ON” and then press MENU .

nSETUP

OSD H-POSITION

Adjusts the horizontal display position of menu screen.

OSD V-POSITION

Adjusts the vertical display position of menu screen.

MONITOR

Select the installation direction of the monitor.

LANDSCAPE

Landscape orientation

PORTRAIT

Portrait orientation

MONAURAL AUDIO

Outputs audio signals as monaural.

LANGUAGE

Sets the display language for the menu screen.

POWER ON DELAY

You can delay the screen display after the monitor is turned on. The period can be set up to 60 seconds in units of one second. When this function is activated, the power LED flashes (at approx. 1 second interval) in orange. This function is disabled when 0 is specified.

OPERATION MODE

MODE1......OFF IF NO OPERATION is set to ON, and

STANDBY MODE is set to LOW POWER. (These settings can not be changed.)

MODE2......Will perform standard operation.

OFF IF NO OPERATION is set to OFF, and STANDBY MODE is set to STANDARD. These settings can be changed.

E22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents PN-E702 Blue For Customers in U.KGREEN-AND-YELLOW BrownRefer Servicing to Qualified Service Personnel Important InformationEuropean Union Information on Disposal for Users private householdsInformation on Disposal for Business Users Other Countries outside the EUDear Sharp Customer Safety Precautions Tips and Safety Instructions For the monitor in portrait orientation For the monitor in landscape orientationDo not place the monitor on a device which generates heat Contents Supplied ComponentsNFront view Part NamesNRear view Power button See Mute button See NRemote control unit Part NamesSignal transmitter 11 EConnecting Peripheral Equipment Connection with a PC or AV equipmentConnecting Peripheral Equipment 13 ERemoving the Handles Connecting the Power CordBinding Cables Handles can be removedRemote control operation range Preparing the Remote Control UnitInstalling the batteries 15 ETurning power on/off Turning Power On/OffTurning on the main power Main power switchNDate/time setting Disabling power on/off operationsNOperation mode Turning Power On/OffMenu Basic OperationMute DisplayWide Zoom Normal Basic Operation NSwitching the screen size19 E Dot by DotNExample of operation Menu ItemsDisplaying the menu screen NMenu screen displayNSCREEN 21 EMenu item details Menu Items NPICTUREMenu Items NSETUPNAUDIO 23 E NOPTIONNMULTI NPIP/PbyP 25 EMenu Items NDual screen display Set using the Multi menu NZOOM2 Special SettingSetting procedure Menu Items NEnlargeNSCHEDULE Power27 E DAY of the WeekNAutomatic adjustment Adjustments for PC screen displayNScreen display for adjustment 29 E PC connection Communication procedureControlling the Monitor with a PC RS-232C Communication conditionsNResponse code format 31 ENID numbers VOLM0020 ← 002VOLM0030 OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←Setting of the Gamma user data 33 EHow to read the command table RS-232C command tablePower control/Input mode selection Command Command field See Direction35 E Controlling the Monitor with a PC RS-232C Screen menuControlling the Monitor with a PC RS-232C Picture menu 37 E Setup menuControlling the Monitor with a PC RS-232C Audio menu Controlling the Monitor with a PC RS-232C Option menu Controlling the Monitor with a PC RS-232C Multi menu Image Position Epos setting39 E Landscape orientation Portrait orientationInitialization/Functional Restriction Setting Function menu Controlling the Monitor with a PC RS-232C PIP/PbyP menu41 E Commands for setting of the Gamma user dataControlling the Monitor with a PC RS-232C Others Controlling the Monitor with a PC LAN Settings to connect to a LANTo set on the monitor To set from a PC Default Gateway 0.043 E Controlling the Monitor with a PC LANBasic operation See pages 45 to 49 for details on each settingControlling with a PC If the Dhcp Client is set to OFF, specify an IP address45 E Standby mode, Power on is the operation availableInformation about this monitor appears DNS Server User Name / PasswordIf the Dhcp Client is set to OFF, specify the subnet mask Accept IP Address47 E Condition Attach the log file to a TEMPERATURE/HARDWARE error e-mailRecipient E-MAIL Addresses Confirmation49 E Troubleshooting Troubleshooting 51 ESpecifications NProduct Specifications53 E NDimensional Drawings SpecificationsNPower management NDDC plug and playSpecifications NCompatible signal timing PC NCompatible signal timing AV55 E Mounting Precautions For Sharp dealers and service engineers PN-E702 Me EN11K1
Top Page Image Contents