Sharp PNE702 Menu Items, Displaying the menu screen, NExample of operation, NMenu screen display

Menu Items

Displaying the menu screen

Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 21 to 25 for details of each menu items.

Caution

•Do not turn the main power switch off while the menu items are being displayed. Doing so may initialize the settings.

nExample of operation

(Adjusting CONTRAST in the PICTURE menu)

1. Press MENU to display the menu screen.

SCREEN	SCREEN		1/1	PC D-SUB
PICTURE	AUTO
	CLOCK		600
AUDIO
	PHASE		25
SETUP
	H-POS		610
	V-POS
OPTION			37
	H-SIZE		50
MULTI
	V-SIZE		50
PIP/PbyP
	H-RESOLUTION		1920
	V-RESOLUTION		1080
	RESET
	1 9 2 0 x 1 0 8 0			END···[MENU]
		V: 60 Hz		H: 67.5 kHz

2.Press or to select PICTURE, and press .

3.Press or to select CONTRAST.

SCREEN	PICTURE		1/2		PC D-SUB
PICTURE	AUTO		64
	ANALOG GAIN
AUDIO	ANALOG OFFSET		86
	BRIGHT		31
SETUP
	CONTRAST		30
	BLACK LEVEL		30
OPTION
	TINT		30
MULTI	COLORS		30
	SHARPNESS		12
PIP/PbyP	RGB INPUT RANGE			FULL
	MOVE OSD···[DISPLAY]				OK···[MENU]
	1 9 2 0 x 1 0 8 0	V: 60 Hz		H: 67.5 kHz

4. Press or to adjust the setting.

SCREEN	PICTURE	1/2			PC D-SUB
PICTURE	AUTO
	ANALOG GAIN		64
AUDIO	ANALOG OFFSET		86
	BRIGHT		31
SETUP	▲ CONTRAST		40
	BLACK LEVEL		30
OPTION
	TINT		30
MULTI	COLORS		30
	SHARPNESS		12
PIP/PbyP	RGB INPUT RANGE ▲			FULL		▲
	MOVE OSD···[DISPLAY]				OK···[MENU]
	1 9 2 0 x 1 0 8 0	V: 60 Hz	H: 67.5 kHz
For items that have		, press		, make settings and then
press MENU.

5. Press MENU twice to close the menu screen.

TIPS

•The menu will differ depending on the input mode.

•The menu screen will close automatically if no operation is performed for about 15 seconds. (DATE/TIME SETTING, SCHEDULE and LAN SETUP screens will close in about 4 minutes.)

nMenu screen display

		1		3			2
SCREEN	PICTURE				1/2		PC D-SUB
PICTURE			AUTO
			ANALOG GAIN		64
AUDIO			ANALOG OFFSET		86
			BRIGHT		31
SETUP	▲
			CONTRAST		30
			BLACK LEVEL		30
OPTION			TINT		30
MULTI			COLORS		30
			SHARPNESS		12
PIP/PbyP			RGB INPUT RANGE ▲			FULL		▲
	MOVE OSD···[DISPLAY]						OK···[MENU]		4
	1 9 2 0 x 1 0 8 0			V: 60 Hz		H: 67.5 kHz

1Name of the menu

2Input mode

3An item being selected (highlighted)

4 Screen resolution of input signal, and other data.

TIPS

•Items that cannot be selected appear in gray.

(e.g. Function not supported by the current input signal)

nMenu Items

The displayed menu items vary depending on whether or not the PN-ZB01 (optional) is attached.

The following menus will be displayed only when the PN-ZB01 (optional) is attached.

Menu	Item
SETUP	HOT PLUG CONTROL	DVI
	RS-232C/LAN SELECT
	LAN SETUP
	AUTO ASSIGN FIXED IP ADDR.
	SPEAKER SELECT
OPTION	INPUT SELECT	DVI
		BNC
	AUDIO SELECT	PC DVI-D
		PC D-SUB
		PC RGB
		AV DVI-D
		AV COMPONENT (BNC)
		AV COMPONENT (D-SUB)
		AV S-VIDEO
		AV VIDEO (BNC)
		AV VIDEO (D-SUB)

PIP/PbyP PIP SOURCE

E20