Sharp PN-E702, PNE702 operation manual 21 E, Menu item details, Nscreen, Menu Items NPICTURE

Page 21
MENU .

Menu item details

The menu will differ depending on the input mode.

nSCREEN

You can move the menu screen display position each time DISPLAY is pressed.

AUTO (PC D-SUB/PC RGB)

The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted.

Pressing performs adjustment.

Use this automatic adjustment when you use the PC D-sub input terminal or PC RGB input terminals to display a PC screen for the first time or when you change the setting of the PC. (See page 28.)

CLOCK (PC D-SUB/PC RGB)

Adjusts frequency for sampling clock for applicable video. Adjust when there is flickering in the form of vertical stripes. When using the adjustment pattern (see page 28), make adjustments so that no vertical stripe noise appears in it.

PHASE (PC D-SUB/PC RGB)

Adjusts sampling clock phase for applicable video.

Useful when small characters appear with low contrast and/ or there are flickers at corners.

When using the adjustment pattern (see page 28), make adjustments so that no horizontal stripe noise appears in it.

*Adjustments to PHASE should be made only after CLOCK has been correctly set.

H-POS

Adjust the horizontal position of the image.

V-POS

Adjust the vertical position of the image.

H-SIZE

Adjust the horizontal size of the image.

V-SIZE

Adjust the vertical size of the image.

H-RESOLUTION (PC D-SUB/PC RGB)

Sets proper horizontal resolution when the resolution of input signals is not recognized properly. (Adjustment may be impossible with some signals.)

V-RESOLUTION (PC D-SUB/PC RGB)

Sets proper vertical resolution when the resolution of input signals is not recognized properly. (Adjustment may be impossible with some signals.)

RESET

Resets the values of the SCREEN menu items to the factory preset values.

Select “ON” and then press

Menu Items

nPICTURE

You can move the menu screen display position each time DISPLAY is pressed.

AUTO (PC D-SUB/PC RGB)

The ANALOG GAIN and ANALOG OFFSET are automatically adjusted.

Pressing performs adjustment.

ANALOG GAIN (PC D-SUB/PC RGB)

Adjusts the bright portions of the video input signal.

ANALOG OFFSET (PC D-SUB/PC RGB)

Adjusts the dark portions of the video input signal.

BRIGHT

Adjusts the backlight brightness. (In PIP mode, the main side setting is reflected in the image.)

CONTRAST

Adjusts the difference between the bright and dark portions of the image.

BLACK LEVEL

Adjusts the entire brightness of the video signals.

TINT

Adjusts the hue. Selecting + changes the color towards green, and selecting - changes it towards magenta.

COLORS

Adjusts the color intensity.

SHARPNESS

Adjusts the sharpness of the image.

RGB INPUT RANGE (PC DVI-D/PC HDMI/PC D-SUB/PC RGB/AV DVI-D/AV HDMI)

Sets the RGB input signal range. When using HDMI set to AUTO, the RGB input signal is detected automatically. Use AUTO normally.

If the RGB input signal range cannot be set appropriately even when using AUTO, set according to the image. When the setting is different, images will be displayed with washed out blacks and compressed gradients.

ADVANCED (AV input)

You can adjust more specifically. (See page 28.)

COLOR MODE

Changes the color mode on the screen. The color mode on the screen can also be changed using a remote control unit. (See page 18.)

* sRGB is PC input only. See page 18 for details.

(In PIP mode, the main side setting is reflected in the image.)

WHITE BALANCE

THRU

Displays the input signal level as is. (for PC

 

DVI-D/PC HDMI only)

PRESET

Selects the color temperature using PRESET.

USER

Used for adjusting R-/G-/B-CONTRAST and

 

R-/G-/B-OFFSET respectively.

(In PIP mode, the main side setting is reflected in the image.)

PRESET

Selects the color temperature when the WHITE BALANCE is set to PRESET.

The setting values are shown for reference. The color temperature of the screen varies over time.

This function is not intended to keep the color temperature constant.

21 E

Page 20 Page 22
Image 21
Page 20 Page 22
Contents PN-E702 GREEN-AND-YELLOW For Customers in U.KBlue BrownImportant Information Refer Servicing to Qualified Service PersonnelInformation on Disposal for Business Users Information on Disposal for Users private householdsEuropean Union Other Countries outside the EUDear Sharp Customer Safety Precautions Tips and Safety Instructions For the monitor in landscape orientation For the monitor in portrait orientationDo not place the monitor on a device which generates heat Supplied Components ContentsPart Names NFront viewNRear view Signal transmitter NRemote control unit Part NamesPower button See Mute button See 11 EConnection with a PC or AV equipment Connecting Peripheral Equipment13 E Connecting Peripheral EquipmentBinding Cables Connecting the Power CordRemoving the Handles Handles can be removedInstalling the batteries Preparing the Remote Control UnitRemote control operation range 15 ETurning on the main power Turning Power On/OffTurning power on/off Main power switchNOperation mode Disabling power on/off operationsNDate/time setting Turning Power On/OffMute Basic OperationMenu Display19 E Basic Operation NSwitching the screen sizeWide Zoom Normal Dot by DotDisplaying the menu screen Menu ItemsNExample of operation NMenu screen displayMenu item details 21 ENSCREEN Menu Items NPICTURENSETUP Menu ItemsNAUDIO NOPTION 23 ENMULTI 25 E NPIP/PbyPMenu Items NDual screen display Setting procedure NZOOM2 Special SettingSet using the Multi menu Menu Items NEnlarge27 E PowerNSCHEDULE DAY of the WeekAdjustments for PC screen display NAutomatic adjustmentNScreen display for adjustment 29 E Controlling the Monitor with a PC RS-232C Communication procedurePC connection Communication conditions31 E NResponse code formatNID numbers VOLM0030 002VOLM0020 ← OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←33 E Setting of the Gamma user dataPower control/Input mode selection RS-232C command tableHow to read the command table Command Command field See DirectionControlling the Monitor with a PC RS-232C Screen menu 35 EControlling the Monitor with a PC RS-232C Picture menu Setup menu 37 EControlling the Monitor with a PC RS-232C Audio menu Controlling the Monitor with a PC RS-232C Option menu 39 E Image Position Epos settingControlling the Monitor with a PC RS-232C Multi menu Landscape orientation Portrait orientationControlling the Monitor with a PC RS-232C PIP/PbyP menu Initialization/Functional Restriction Setting Function menuCommands for setting of the Gamma user data 41 EControlling the Monitor with a PC RS-232C Others Settings to connect to a LAN Controlling the Monitor with a PC LANTo set on the monitor 43 E Default Gateway 0.0To set from a PC Controlling the Monitor with a PC LANControlling with a PC See pages 45 to 49 for details on each settingBasic operation If the Dhcp Client is set to OFF, specify an IP addressStandby mode, Power on is the operation available 45 EInformation about this monitor appears If the Dhcp Client is set to OFF, specify the subnet mask User Name / PasswordDNS Server Accept IP Address47 E Recipient E-MAIL Addresses Attach the log file to a TEMPERATURE/HARDWARE error e-mailCondition Confirmation49 E Troubleshooting 51 E TroubleshootingNProduct Specifications SpecificationsNPower management NDimensional Drawings Specifications53 E NDDC plug and playNCompatible signal timing AV Specifications NCompatible signal timing PC55 E Mounting Precautions For Sharp dealers and service engineers PN-E702 Me EN11K1
Top Page Image Contents