Sharp PNE702, PN-E702 operation manual Mounting Precautions For Sharp dealers and service engineers

Page 56

Mounting Precautions

(For SHARP dealers and service engineers)

•When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.

•Be sure to use a wall-mount bracket designed or designated for mounting the monitor.

•This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials such as plaster / thin plastic board / wood before starting installation.

This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor. Install by the most suitable method for the material and the structure.

•To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the thickness of the mounting bracket.

•When moving the monitor, be sure to hold it with the handles and the unit bottom. Do not hold the LCD panel. This may cause product damage, failure, or injury.

•After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.

•Do not use any screw holes other than VESA holes for installation.

E56

Image 56

Contents PN-E702 For Customers in U.K GREEN-AND-YELLOWBlue BrownRefer Servicing to Qualified Service Personnel Important InformationInformation on Disposal for Users private households Information on Disposal for Business UsersEuropean Union Other Countries outside the EUDear Sharp Customer Safety Precautions Tips and Safety Instructions Do not place the monitor on a device which generates heat For the monitor in landscape orientationFor the monitor in portrait orientation Contents Supplied ComponentsNRear view Part NamesNFront view NRemote control unit Part Names Signal transmitterPower button See Mute button See 11 EConnecting Peripheral Equipment Connection with a PC or AV equipmentConnecting Peripheral Equipment 13 EConnecting the Power Cord Binding CablesRemoving the Handles Handles can be removedPreparing the Remote Control Unit Installing the batteriesRemote control operation range 15 ETurning Power On/Off Turning on the main powerTurning power on/off Main power switchDisabling power on/off operations NOperation modeNDate/time setting Turning Power On/OffBasic Operation MuteMenu DisplayBasic Operation NSwitching the screen size 19 EWide Zoom Normal Dot by DotMenu Items Displaying the menu screenNExample of operation NMenu screen display21 E Menu item detailsNSCREEN Menu Items NPICTURENAUDIO NSETUPMenu Items 23 E NOPTIONNMULTI Menu Items NDual screen display 25 ENPIP/PbyP NZOOM2 Special Setting Setting procedureSet using the Multi menu Menu Items NEnlargePower 27 ENSCHEDULE DAY of the WeekNScreen display for adjustment Adjustments for PC screen displayNAutomatic adjustment 29 E Communication procedure Controlling the Monitor with a PC RS-232CPC connection Communication conditionsNID numbers 31 ENResponse code format 002 VOLM0030VOLM0020 ← OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←Setting of the Gamma user data 33 ERS-232C command table Power control/Input mode selectionHow to read the command table Command Command field See Direction35 E Controlling the Monitor with a PC RS-232C Screen menuControlling the Monitor with a PC RS-232C Picture menu Controlling the Monitor with a PC RS-232C Audio menu Setup menu37 E Controlling the Monitor with a PC RS-232C Option menu Image Position Epos setting 39 EControlling the Monitor with a PC RS-232C Multi menu Landscape orientation Portrait orientationInitialization/Functional Restriction Setting Function menu Controlling the Monitor with a PC RS-232C PIP/PbyP menuControlling the Monitor with a PC RS-232C Others Commands for setting of the Gamma user data41 E To set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN Default Gateway 0.0 43 ETo set from a PC Controlling the Monitor with a PC LANSee pages 45 to 49 for details on each setting Controlling with a PCBasic operation If the Dhcp Client is set to OFF, specify an IP addressInformation about this monitor appears Standby mode, Power on is the operation available45 E User Name / Password If the Dhcp Client is set to OFF, specify the subnet maskDNS Server Accept IP Address47 E Attach the log file to a TEMPERATURE/HARDWARE error e-mail Recipient E-MAIL AddressesCondition Confirmation49 E Troubleshooting Troubleshooting 51 ESpecifications NProduct SpecificationsNDimensional Drawings Specifications NPower management53 E NDDC plug and playSpecifications NCompatible signal timing PC NCompatible signal timing AV55 E Mounting Precautions For Sharp dealers and service engineers PN-E702 Me EN11K1