Sylvania LD200SL9 owner manual 5Language Selection, English Español Français, Press Setup to exit

INITIAL SETTING

Note:

•If you connect the cable system directly, contact the CATV installer.

•If you press [POWER] or [SETUP] during auto channel scan, the setting will be canceled.

•When no channel can be received by auto channel scan, “NO TV SIGNALS” will be displayed on the TV screen.

•Channel settings will be saved even if the power fails.

•If you have Spanish or French menus and need English, press [SETUP]. Use [Cursor K/L] to select “IDIOMA” or “LANGAGE”. Press [ENTER] to select “ENGLISH”. Press [SETUP] to remove the main menu.

•With regard only to the digital channel, even after the scanning is complete if you unplug the AC power cord before turning off the unit by pressing [POWER], the channel setting may be lost.

5Language Selection

You can choose English, Spanish, or French as your on-screen language.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “LANGUAGE”, then press [ENTER] repeatedly to change the setting.

e.g.) digital TV mode

	- TV SETUP	-
or	CHANNEL SETUP
	V-CHIP SETUP
	LANGUAGE	[ENGLISH]
	CAPTION	[OFF]
	BACK LIGHT	[BRIGHT]
	COLOR TEMP.	[NORMAL]
	DTVCC

[ENGLISH]

[ESPAÑOL]

[FRANÇAIS]

3 Press [SETUP] to exit.

14

EN