INFORMATION
5Glossary
ATSC | Dolby Digital | Region Code |
INTRODUCTION
Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards.
Aspect ratio
The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the screen is almost square); widescreen models are 16:9 (the screen is almost twice as wide as its height).
Component Video
This is a video signal format that conveys each of 3 principal colors of light (red, blue and green) through different signal lines. This allows the viewers to experience picture colors as original as it is. There are several signal formats, including Y / Pb / Pr and Y / Cb / Cr.
The system developed by Dolby Labora- tories to compress digital sound. It offers stereo sound (2ch) or
EDTV (enhanced definition TV)
Enhanced digital format that takes
HDTV (high definition TV)
Ultimate digital format that produces high resolution and high picture quality.
NTSC
Acronym that stands for National Television Systems Committee and the name of the current analog broadcasting standards.
Password
A stored
Regions associate discs and players with particular areas of the world. this unit will only play back discs that have compatible region codes. You can find the region code of your unit by looking on the rear panel.
Some discs are compatible with more than one region (or all regions).
SAP (secondary audio program)
SDTV (standard definition TV)
Standard digital format that is similar to the NTSC picture quality.
S-video
Offers higher quality images by deliver- ing each signal, color (c) and luminance
(y)independently of each other through separate cables.
CONNECTION INITIAL SETTING WATCHING TV OPTIONAL
5Maintenance
Cabinet Cleaning
•Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry.
•Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces.
Servicing
Should your unit become inoperative, do not try to correct the problem yourself. There are no user serviceable parts inside. Turn off the unit, unplug the power cord and call our toll free customer support line found on the cover of this manual to locate an authorized service center.
Panel Cleaning
Wipe the panel with a soft cloth. Before cleaning the panel, disconnect the power cord.
If the Laser Optical Pickup Unit is Dirty
•If the unit still does not perform properly when it is operated, while referring to the relevant sections and to "Troubleshooting Guide" in this owner’s manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.
Disc Handling
•Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
•Always store the disc in its protective case when it is not used.
•To
•Do not use a hard cloth since this will mar the disc.
•Wipe the disc in a straight line from center to edge.
•Never wipe with a circular motion.
•Do not use detergent or abrasive cleaning agents.
IR Signal Check
If the remote control is not working properly, you can use an AM radio or digital camera (including a cellular phone with 
• With an AM radio:
Tune the AM radio station to a
• With a digital camera
(including built-in cell phone cameras)
Point a digital camera towards the remote control. Push any button on the remote control and look through the digital camera. If the infrared light appears through the camera, the remote control is working.
45
SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
EN