TV/VCR SECTION
TV OPERATION AND SETTINGS
CLOCK SET UP
Set the unit clock correctly for VCR timer TV/VCR recording. We suggest that you should
set the clock manually when you first set up the unit, then set the auto clock setting to "ON" to cor- rect the time periodically.
NOTE:
•If you cannot receive a station with time signals, auto clock setting is not available. Use manual setting only.
AUTOMATIC CLOCK SETTING
NOTES:
•If a cable converter box is being used, make sure it is turned on.
•You must use the remote control for the clock setting.
•If the unit is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself and the unit must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to enable to set up or correct the clock automatically.
MANUAL CLOCK SETTING
In the example below, the clock is to be set to:
DATE: | May 5th, 2006 | |
SETTING TIME: | 5:40PM |
|
|
|
|
1 Press |
| - TV/VCR SETUP - |
Use [K / L] to point to |
| TIMER PROGRAMMING |
| B SETTING CLOCK | |
"SETTING CLOCK", then | CHANNEL SET UP | |
USER’S SET UP | ||
1 Press | - TV/VCR SETUP - | |||
Using [K / L] select "SETTING | TIMER PROGRAMMING | |||
CHANNEL SET UP |
|
| ||
| B SETTING CLOCK |
|
| |
CLOCK", then press [ENTER]. | USER’S SET UP |
|
| |
|
| |||
LANGUAGE [ENGLISH] | ||||
| ||||
2 Press [ENTER] to select "ON". | CAPTION [OFF] |
|
| |
ZERO RETURN |
|
| ||
INDEX SEARCH |
|
| ||
| TIME SEARCH |
|
| |
| – SETTING CLOCK – | |||
| B AUTO CLOCK | [ON] | ||
| AUTO CLOCK CH SEARCH | |||
| AUTO CLOCK CH | [ 02 ] |
| |
| MANUAL CLOCK SET |
|
| |
press [ENTER]. |
| ||
LANGUAGE [ENGLISH] | |||
CAPTION [OFF] |
| ||
| ZERO RETURN |
| |
2 Use [K / L] to point to | TIME SEARCH |
| |
– SETTING CLOCK – | |||
|
| ||
AUTO CLOCK | [ON] | ||
"MANUAL CLOCK SET", then | |||
AUTO CLOCK CH SEARCH | |||
press [ENTER]. | AUTO CLOCK CH | [ 02 ] | |
3Press [L] to select
"AUTO CLOCK CH SEARCH". Then press [ENTER].
• The unit begins searching for |
the station which contains the |
– SETTING CLOCK –
AUTO CLOCK | [ON] |
BAUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
D.S.T.[OFF]
• If there is no local PBS station in your area or on your cable sys-
[OFF]
auto clock set signal. The |
search for a signal may take up |
– AUTO CLOCK CH SEARCH –
08 10 13
tem, select "AUTO CLOCK" and press [ENTER] to turn "OFF" the function before this step.
3 Use [K / L] to set your | – MANUAL CLOCK SET – | |
|
| |
desired month, day, year, hour | MONTH DAY | YEAR |
to 20 seconds per channel. |
• When the search has finished, |
"_ _" appears at the lower left of |
the screen. |
_ _
and minute. | 0 5 | / 0 5 FRI 2 0 0 6 | |
|
| ||
Use [s / B] to move to | HOUR | MINUTE | |
0 5 | : 4 0 PM | ||
another item. | |||
|
|
4 Press
Although seconds are not | 5:40 PM |
displayed, they begin counting |
|
from 00 when you press |
|
| |
synchronize the clock with the correct time. |
|
NOTES:
•During AUTO CLOCK CH SEARCH, the picture may be distorted.
•If no number appears on the TV screen, there are no stations in your area which contain the Auto Clock signal. Auto Clock Setting is not possible. Please use Manual Clock Setting on this page.
4Write down the numbers that appear on the screen. They are the auto clock stations in your area.
NOTE:
•When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock.
TO CHANGE CLOCK SETTING
5Press [RETURN] to go back to "SETTING CLOCK" menu.
Press [L] to select "AUTO CLOCK CH".
Use [s / B] until you locate an auto clock station number.
– SETTING CLOCK –
AUTO CLOCK | [ON] |
AUTO CLOCK CH SEARCH | |
B AUTO CLOCK CH | [ 08 ] |
MANUAL CLOCK SET |
|
D.S.T. | [OFF] |
1Follow steps 1 to 2 above.
2Select the item you want to change using [B].
3Enter correct numbers using [K / L].
4Press
6Press
NOTE:
•Once the unit is turned off, it will periodically check and set the correct date and time.
10
EN