Sylvania 6719DG Changing the DVD SET UP Items Display Setting, Audio Setting, Parental Setting

STILL MODE

AUTO

FIELD

FRAME

DVD SECTION

CHANGING THE DVD SET UP ITEMS

B DISPLAY SETTING

4 Use [K / L] to select an item,
	SETUP		DISPLAY
then press [ENTER].
		TV MODE		4:3 LETTER BOX
		STILL MODE		AUTO

• TV MODE: QUICK

You can change certain aspects of the DVD display screens and on-screen messages on the TV screen.

• 4:3 LETTER BOX (default):
	SETUP		DISPLAY
To show black bars on top and	TV MODE
		4:3 LETTER BOX
bottom of the screen.		4:3 PAN & SCAN

•4:3 PAN & SCAN:

To show a full height picture with both sides trimmed.

NOTE:

C AUDIO SETTING

Choose the appropriate Audio settings for your equipment as it only affects during the playback of DVD discs.

4 Use [K / L] to select an item,
	SETUP		AUDIO
then press [ENTER] repeated-
		DRC		ON
ly until your desired setting		DOWN SAMPLING		ON
		DOLBY DIGITAL		BITSTREAM
appears.

•DRC (Dynamic Range Control):

•ON : To compress the range of soft to loud sound. (default)

•OFF : Output the original sound.

•You can access this setting directly by selecting "QUICK" at step 2 on page 29.

•STILL MODE:

This function allows you to adjust picture resolution and quality in the still mode.

SETUP DISPLAY

• AUTO (default): Automatically select the best

resolution setting (FRAME or FIELD) based on the data characteristics of the pictures.

•FIELD:

Select "FIELD" when the pictures are still unstable even if "AUTO" is selected. FIELD stabilizes the pictures, although the picture quality may become coarse due to the limited amount of data.

•FRAME:

Select "FRAME" to display relatively motionless pictures in higher resolution. FRAME improves the picture quality, although it may unstabilize the pictures due to simultaneous output of two field data.

5Press [SET-UP]to exit the menu.

•DOWN SAMPLING:

•ON : Output in 48kHz. (default)

•OFF : Output the original sound.

NOTE:

•When playing a disc with copyright protection, the sound will be output at 48kHz even if the setting is "OFF".

•DOLBY DIGITAL: QUICK

•BITSTREAM: Output a Dolby Digital signal.

(default)

• PCM: Convert the Dolby Digital to PCM.

(2 channel stereo)

NOTE:

•You can access this setting directly by selecting "QUICK" at step 2 on page 29.

•Set to "BITSTREAM" when the unit is connected to a Dolby Digital Decoder.

5Press [SET-UP]to exit the menu.

D PARENTAL SETTING

This feature allows you to set the rating level of your DVD discs. Playback will stop if the disc ratings exceed the level you set.

PARENTAL LEVEL

4Enter four-digit password with the Number buttons, then press [ENTER].

NOTE:

SETUP PARENTAL

PASSWORD

Please enter a 4-digit password.

•Enter any 4 digits (except for 4737) to set the pass- word for the first time, and record it for your memory.

5Use [K / L] to select "PARENTAL LEVEL", then press [ENTER].

SETUP PARENTAL

PARENTAL LEVEL	ALL
PASSWORD CHANGE

30

EN