TV/VCR SECTION
ON-SCREEN DISPLAY
STATUS DISPLAY
On screen display examples are shown | TV/VCR | ||
below. |
|
|
|
1 | PLAY B | 12:00AM | 3 |
|
| CH 123 | 4 |
CHECKING THE STATUS
While receiving a broadcast or playing a TV/VCR VHS tape, you can check the status dis-
played on the screen by pressing [DISPLAY]. The display will change as shown below each time you press [DISPLAY].
2 | SP | COUNT 0:00:00 | 5 |
1. VCR status
Displays the current VCR motion:
PLAY / STOP / REC / OTR / PAUSE / FF / REW
2.Tape speed (during recording) Displays the tape speed: SP / SLP
3.Clock
4.Channel number (in TV mode) Displays the current channel number. "AUX" is displayed in external input mode.
5.Tape counter (during playback or recording) Shows the elapsed recording or playback time. (Not available for a blank tape or blank portions on the tape.) You can reset the counter by press- ing [CLEAR].
WHEN THE CLOSED CAPTION IS OFF
The display switches among VCR counter and clock.
Display OFF | COUNTER display | CLOCK display | |
| STOP | STOP | 5:40PM |
|
|
| CH2 |
| SP COUNT 0:12:34 | SP |
|
| After 5 seconds | After 5 seconds | |
|
|
| 5:40PM |
|
|
| CH2 |
COUNT 0:12:34
WHEN THE CLOSED CAPTION IS ON
The display switches among VCR counter and clock.
Display OFF | CLOCK/COUNTER | |
|
| display |
| STOP | 5:40PM |
|
| CH2 |
*The display will disappear
SP COUNT 0:12:34 | after 5 seconds |
|
14
EN