Sylvania 6719DG owner manual Automatic Timer Recording, To Confirm the Program

AUTOMATIC TIMER RECORDING

In the example below, the timer is being set to record:

TIME SEARCH

INDEX SEARCH

NOTE:

•If you have not yet set the clock, "MANUAL CLOCK SET" menu appears. Set to the present time and date (refer to "MANUAL CLOCK SETTING" on page 10) then start setting the timer recording.

7Press [ENTER] to complete setting.

•To set another program, repeat steps 2 to 7.

•To correct the program while setting, press [s] to go back one step and use [K / L] to enter the correct numbers.

•Press [SET-UP]to exit the menu.

8Press [POWER] to set automatic timer recording. The recording indicator lights up.

NOTES:

•You MUST turn off the unit to activate automatic timer recording.

•If power is not turned off and you continue watching TV, "TIMER REC STANDBY" starts

TV/VCR SECTION

RECORDING

flashing on the TV screen 2 min- utes before the programmed start time.

TIMER REC STANDBY

•If the unit is connected to a cable box or satellite box, the unit must be on CH3 or CH4. Select the channel to be recorded on the cable box or satellite box.

•Make sure a cassette with erase-prevention tab is inserted before turning off the unit. If the cassette does not have the tab, it will be ejected when you press [POWER] to turn off.

9At the programmed start time, the unit begins recording.

NOTES:

4Set the starting date.

For once recording : Press [K] until the desired date appears. Then press [B].

For every day recording :

To record the same channel at the same time every day.

Press [L] until "EVRY DAY" appears, then press [B].

For weekly recording :

To record the same channel at the same time every week.

Press [L] until "EVRY" and your desired day of the week (Ex. Every Monday) appear, then press [B].

– TIMER PROGRAMMING –

•The recording starts without turning on the TV screen.

•During recording, you can watch only currently being recorded TV program or DVD playback.

Press [POWER] and [SELECT] to select the desired mode.

•If the tape runs out before the end time, the recording stops immediately and the cassette will be ejected.

TO CONFIRM THE PROGRAM

1Press [POWER] to turn on the unit. (The Recording indicator turns off.)

2Press [SET-UP].

Use [K / L] to select "TIMER PROGRAMMING", then press [ENTER].

3Confirm the details of programs that appear on the TV screen.

4Press [SET-UP]to exit the menu.