DVD SECTION
SPECIAL PLAYBACK FUNCTIONS & SETTINGS
PROGRAMMED PLAYBACK
You can determine the playing order of tracks.
1In the stop mode, press [MODE].
• The PROGRAM screen appears. | PROGRAM |
|
| |
| TOTAL 0:00:00 | |||
|
| 1 | 3:40 |
|
|
| 2 | 4:30 |
|
|
| 3 | 5:00 |
|
|
| 4 | 3:10 |
|
|
| 5 | 5:10 |
|
|
| 6 | 1:30 |
|
| ENTER | 7 | 2:30 | 1/1 |
|
| 1/4 | ||
| PLAY | 1 | 3:40 |
|
| CLEAR |
| ||
5Press [STOP C] to temporarily stop the playback. You can resume the playback by pressing [PLAY B].
Press [STOP C] twice to cancel the pro- grammed playback.
NOTE:
•REPEAT setting is available during programmed playback. (Refer to "REPEAT TRACK" on page 27.)
2Use [K / L] to select a track,
then press [ENTER]. | PROGRAM |
|
|
|
TOTAL 0:14:25 | ||||
| 1 | 3:40 | 1 | 3:40 |
NOTES: | 2 | 4:30 | 3 | 5:00 |
3 | 5:00 | 10 | 1:30 | |
6 | 1:30 | 12 | 2:45 | |
| 4 | 3:10 | ||
| 5 | 5:10 | 6 | 1:30 |
• Up to 99 tracks can be entered. | 7 | 2:30 |
| 1/1 |
ENTER | 1/4 |
| ||
CLEAR6 | 1:30 |
|
| |
| PLAY |
|
|
|
•Press [CLEAR] to erase the most recently entered track.
•If you enter more than 8 tracks, you can change pages of the program list with [ H / G ].
•To erase all tracks in the program at once, select "ALL CLEAR" at the bottom of the track list.
RANDOM PLAYBACK
This function shuffles the playing order of tracks.
1 In the stop mode, press | RANDOM | ||
[MODE] twice. |
|
| |
|
| RANDOM PROGRAM | |
• The RANDOM screen appears. |
|
| |
|
| - - no indication - - | |
|
|
| |
| PLAY |
|
|
|
|
|
|
3Repeat step 2 until you select all the tracks you want to play in the program.
4Press [PLAY B] to play the programmed tracks.
2Press [PLAY B] to start random playback.
NOTE:
•REPEAT setting is available during random playback. (Refer to "REPEAT TRACK" on page 27.)
3Press [STOP C] to stop random playback.
ON-SCREEN INFORMATION
You can check the information about the current disc by pressing [DISPLAY].
For DVD-Videos
1Press [DISPLAY] during playback to show cur- rent Chapter.
• The elapsed and remaining playing time of the current chapter will be displayed.
2Press [DISPLAY] again to show current Title.
• The elapsed and remaining
1/3
playing time of the current title will be displayed.
3 Press [DISPLAY] again.
•The bit rate and the current repeat setting will be displayed.
•If you are playing a dual layered disc, the layer number will also be displayed.
(L0: Layer 0 is playing. L1: Layer 1 is playing).
4Press [DISPLAY] again to exit.
For Audio CDs
1Press [DISPLAY] during playback to show the
current Track.
• The elapsed and remaining 
4/12 0:03:21 - 0:02:15 
T playing time of the current
track will be displayed.
2Press [DISPLAY] again to show current Total
Track. | 4/12 0:13:45 - 0:45:40 T |
•The elapsed and remaining playing time of the total track
will be displayed. | PROGRAM | B |
When in the PROGRAM mode or RANDOM mode.
3Press [DISPLAY] again to exit.
28
EN