Settings
Channel settings
Although the automatic programme scan sets all available channels/programmes, the menu Programmes allows you to make changes in the programme list.
The TV set provides for three options:
-manual setting of programmes
-Repeat automatic (TTS) scan
-Change order of channels
Manual setting of channels
➜Press the MENU key to display the Main Menu.
➜Use the Programme keys to mark the menu item
Programmes, then press the OK key to select. The menu Programme will be displayed.
➜Use the OK key to select the menu item
Programme Settings.
A list of programmes stored in memory will be dis- played.
Programming for terrestrial resp. cable channels
The following programming instructions should be used for channels supplied by a terrestrial antenna, or by a cable network.
Source
In order to adjust a terrestrial or cable chan- nel, TER must be selected as the source.
➜Use the Programme keys to mark the menu item
Source.
➜Use the Volume keys to select TER, then press the OK key to store in memory.
Channel Type
➜Use the Programme keys to mark the menu item
Channeltype.
➜Use the Volume keys to select the C- or
nel, then press the OK key to store in memory. Hint: Information on the channel availability at your
place of residence will be provided by your local cable provider.
➜Use the Programme keys to mark the programme slot you wish to change, then press the OK key to
select
Hint: Using the Volume keys, you can move aro- und in the list in blocks of ten channels at a time.
The programming menu of the selected channel will be displayed.
This programming menu will contain varying points, depending on whether a satellite channel is selected via a
Channel
➜Use the Programme keys to mark the menu item
Channel.
➜Use the Volume keys or the 0 - 9 keys on the numeric keypad to select the channel, then press the OK key to store in memory.
Fine Tuning
➜Use the Programme keys to mark the menu item Fine Tuning.
➜Use the Volume keys to determine the best image quality on screen, then press the OK key to store in memory.
Norm (Standards)
Your retailer will be able to advise you on the norms/standards used by foreign channels. German channels generally utilise the B/G norm.
D/K
I(I+)
L(L')
➜Use the Programme keys to mark the menu item Norm.
➜Use the Volume keys to select the norm, then press the OK key to store in memory.
10