TechniSat 100Hz Television sets Colani-TV Classic Line Timer / Clock, Clock Time, Programme Timer

Page 21

Settings

Timer / Clock

The TV set has an internal clock, as well as several timers.

Clock (Time)

You will generally not have to set the date and time, as the internal clock is set automa- tically each time the set is switched on. The correct time is downloaded from the tele text information of whichever programme has been stored in programme slot 1.

So that the timer function is available to you even under unusual reception conditions, (e.g. if your TV set is to be used in a distant foreign country, or if the SCART connection is used to supply the TV signal to the set), pro- vision is made for this to be set manually in the menu Clock.

The time setting is retained while the TV set is in standby mode.

Press the MENU key to display the Main Menu.

Use the Programme keys to mark the menu item Timer, then press the OK key to select.

Use the Programme keys to mark the menu item Clock, then press the OK key to select.

The menu Clock will be displayed.

Time and date can be set on this menu.

Programme Timer

Four timer blocks are available for automatic video recordings; in each case, the program- me slot, as well as the date and time for beginning and end of the recording (switching TV set on and off) can be entered. When a timer has been set, the TV screen and sound section are switched off, so that the TV set draws less current than during regular opera- tion. The times set for the various timers may not overlap, i.e. each timer block must be completed before the start of the next block. As the internal clock may be slightly inaccura- te, and as broadcast times for TV program- mes may differ slightly from published times, you should plan for a slight reserve in your timer settings. The exact recording time will be determined by the video recorder.

Use the MENU key to display the Main Menu.

Use the Programme keys to mark the menu item Timer, then press the OK key to select.

Use the Programme keys to mark the menu item

Programme Timer, then press the OK key to sel- ect.

The menu Programme Timer will be displayed.

Menu Timer

Menu Clock

Use the Volume keys to move around the fields in which you wish to enter data, and use the Programme keys to change the values.

Use the OK key to accept the time display.

Press the MENU key to return to the menu Timer, or press the RADIO/TV key to return to the TV pic- ture.

Use the Volume keys to select on of the four Timer No., then press the OK key to store in memory.

Use the Programme keys to mark the menu item State, then use the Volume keys to set.

OFF

Timer is deactivated

ONCE Timer switches on and off once

DAILY Timer switches on and off daily, inde-

pendent of the date

WEEKLY Timer switches on and off on the same weekday

Press the OK key to store in memory.

20

Image 21
Contents For 100Hz Television sets Contents Operating the equipment correctly Initial OperationYour Initial Operation has been successfully con- cluded Operation and SafetyRemote control Control elementsBack panel sockets Daily Operation Switching to radio reception radio mode Selecting Sound ModeDisplaying Time, Date and Information Freeze FrameTele text Picture settings SettingsSound Settings Channel settings Decoder EC1 NameTele Text Language Programming for Satellite ChannelsPolarisation Sat Selecting SatelliteFrequency Audio TypeMode Radio Mode Decoder ModeAmplification Contrast Automatic scan of channels TTS Change OrderInsert Programme Copying a programme Change ProgrammesDelete Programme ProgrammeSetting LOF V/ LOF H Satellite Settings KHz SignalPolarity Satellite SelectionPosition DiSEqC on Position DiSEqC offDiSEqC LNB SupplyConnecting AV equipment AV ConfigurationConnecting a video recorder VHS /Video Copying between two video recordersConnecting a component with RGB outputs Connecting a video recorder to the antenna socketPlayback from a camcorder Copying from Camcorder to Video recorderProgramme Timer Timer / ClockTV set has an internal clock, as well as several timers Clock TimeSleeptimer Connecting a HI-FI systemHeadphone Connection VGA/ Computer Connection VGA/ Computer ConnectionVGA Computer Connection ADR ADR-Scan Stroring new ADR programmes in memoryStoring an ADR programme in memory Audio TypesTechnical Terms Glossary Index of keywords Trouble-shooting guideProgramme Allocation Tables SVM Technical DataSwitch key for previous programme Switching the TV set on or offAdjusting volume Selecting sound modeKey functions of the remote control unit Display hint Freeze frameDisplay clock time Zoom only in 169 sets