DiSEqC

Position DiSEqC off

➜Use the Programme keys to mark the menu item

Position.

➜Use the Volume keys to select Position A or B, then press the OK key to store in memory.

Settings

➜Use the Volume keys to set the LNB feed to 13/18V or 14/19V or OFF, then press the OK key to store in memory.

➜Use the RADIO/TV key to exit this menu, or press the Programme keys to continue to the menu item DiSEqC.

Position DiSEqC on

The Satellite menu will display the menu item Matrix instead of Position, providing the subsidiary options Position and Option.

➜Use the Programme keys to select the menu item

Matrix.

➜Use the Volume keys to select Matrix 1 to 4, then press the OK key to store in memory.

➜Use the RADIO/TV key to exit this menu, or use the MENU key to return to the menu Sat-outdoor unit.

If the external unit is not fitted with DiSEqC components, the DiSEqC function should be switched off.

➜Use the MENU key to display the Main Menu.

➜Use the Programme keys to mark the menu item Programmes, then press the OK key to select.

➜Use the Programme keys to mark the menu item Sat-outdoor unit, then press the OK key to sel- ect.

➜Use the Programme keys to mark the menu item

DiSEqC.

➜Use the Volume keys to set the DiSEqC to OFF or ON, then press the OK key to store in memory.

➜Use the RADIO/TV key to exit this menu.

LNB Supply

The voltage of an LNB is usually 13/18V. If you are using an installation with a star-form distribution and multiswitches, the voltage should be set to 14/19V. In the case of instal- lations with serial distribution, so-called single cable solutions, the LNB feed must be swit- ched off.

➜Use the MENU key to display the Main Menu.

➜Use the Programme keys to mark the menu item Programmes, then press the OK key to select.

➜Use the Programme keys to mark the menu item Sat-outdoor unit, then press the OK key to sel- ect.

➜Use the Programme keys to mark the menu item

LNB Supply.

Language

➜Use the MENU key to display the Main Menu

➜Use the Programme keys to mark the menu item Language, then press the OK key to select.

➜Use the Programme keys to mark the desired lan- guage, then press the OK key to select and store in memory.

➜Use the RADIO/TV key to exit this menu.