VGA Computer Connection - ADR
Horizontal Shift
➜Set the image to be in the centre of the screen on the horizontal plane, then press OK key to store in memory.
Horizontal Size
➜Set the width of the image so that all parts of the PC image are visible on the left and right borders of the image, then press the OK key to store in memory.
Vertical Shift
➜Set the image so that it is centred on the screen in the vertical plane, then press the OK key to store in memory.
Vertical Size
➜Set the height of the image so that all parts of the PC image are visible on the upper and lower bor- ders of the image, then press the OK key to store in memory.
Parabola
➜Set vertical lines on the left and right borders of the image so that they appear straight, then press the OK key to store in memory.
Trapezoid
➜Set the vertical lines on the left and right borders
of the image so that they appear to run parallel, then press the
OK key to store in memory.
➜Use the RADIO/TV key to exit this menu.
ADR (ASTRA DIGITAL RADIO)
If your TV set is fitted with an ADR module, you have the opportunity to listen to the ADR radio programmes broadcast all over Europe via satellite in
The ADR programmes are stored in memory at the factory, but you can, of course, update this list whenever you wish. The exact positi- on of the ADR programme package depends on the number of programmes found by means of TTS scan.
(The programme slot of the first ADR pro- gramme = 351 plus the number of terrestrial and cable programmes).
Operation
➜Select any ADR programme slot.
You will hear the sound tracks of the ADR station selected. After a short time the ADR display table will appear, showing additional information provided by the station.
➜Press the MENU key to deselect the display of the ADR display table, and to return to normal operati- on of the TV set.
Hint: The controls on the front panel of the TV set, as well as the Switching, OK and EXT keys are only functional when the ADR display table is switched off.
➜Selecting a different ADR programme will result in the ADR display table being shown again.
➜Press the RADIO/TV to switch into radio mode (see page 6), i.e. the picture tube is switched off completely.
You can listen to the sound of the ADR programme selected. The volume control is functional.
The power consumption of the TV set is sig- nificantly reduced when radio mode is in use.
23