Daily Operation
Switching the TV on and off |
| Channel Selection |
Switching on via Power key on the TV set
➜To switch on, press the Power key on the front panel of the TV set.
Switching on from Standby mode
➜Use either the Standby/ on key on the remote
control unit.
Or
➜Use the Programme keys on the remote control
unit.
Or
➜Use the keys 0 to 9 on the numeric keypad.
Or
➜Use the two keys on the left of the panel behind
the cover on the TV set.
The mode display light will change from red to green.
Switching the set of
➜Use the Power key on the set, or the Standby/ on key on the remote control in order to switch off the TV set.
If the Standby/ on key was used to switch off the set, it will go into standby mode, and can be switched on again using the Standby/ on key.
The
Note:
The last switching command given by the remote control, whether On or Off, will be sto- red in memory by the set.
Should the set have been switched of via the Power button on the set while in this operatio- nal mode, repeated pressing of the Power key will result in the set being switched on, and not into standby mode.
Should you experience a power failure, we recommend you switch the set off via the Power key, so as to avoid the set swit- ching itself on again unintentionally later.
Adjusting the volume
Using the remote control
➜Press the Volume keys to adjust the volume of the
A bar representing the current volume level will be displayed
Using the controls on the TV set
➜Press the marked area on the covering flap on the front panel of the TV set.
➜Use the two keys on the right to adjust the volume.
Direct channel selection using the numeric keypad
➜Press the Programme keys to select a new chan-
nel.
In addition, the programme place in the list, the channel logo and the status of sound reproduction will be displayed.
The status of sound reproduction modes may be one of the following:
mono 
stereo 
dual
➜By pressing a number or several numbers within a space of 3 seconds, a new channel can be selec- ted directly.
Selecting channel from the programme list
➜Press the OK key to see the list of programmes on screen.
➜Use the Programme keys to select a new programme, and confirm by pressing the OK key.
Hint: In order to select the programme more quickly, use the Volume keys to page through the list in blocks of 19 programmes at a time.
Selecting a channel with controls on the TV set
➜Press the marked area on the covering flap on the front panel of the TV set.
➜Use the two keys on the left to select a new chan- nel.
Exchange function with last channel selected
➜Pressing the Switching key will switch to the pro- gramme previously selected.
Each time the channel switch key is pressed, the programme number, name of the channel and status of sound mode will be displayed briefly.
Showing Hints and Tips
➜Press the yellow ? key to display or hide a table of hints.
5