Name

This menu item allows you to set a name of your choice for each channel, with a maxi- mum of 6 characters.

➜Use the Programme keys to mark the menu item Name, then press the OK key to confirm.

➜Use the Volume keys to select the item to be changed.

➜Use the Programme keys to select a letter, num- ber or symbol for that space.

➜Repeat the last two steps for each space in the name.

➜Press the OK key to store this name in memory.

Decoder EC1

In order to receive a scrambled (encoded) programme, a decoder may be connected to the SCART1 socket. In this case, the follo- wing setting must be made:

➜Use theProgramme keys to mark the menu item

Decoder EC1.

➜Activate the Decoder EC1 setting by pressing the Volume keys to select ON, then press the OK key to store in memory.

For free-to-air channels (not encoded), Decoder EC1 must be set to OFF.

Tele Text Language

The Tele Text language setting selects the set of symbols available for tele text. The default setting made at the factory is WEST. Should you encounter problems with foreign chan- nels (e.g. some letters are not displayed cor- rectly), you can use this item to make correc- tions.

➜Use the Programme keys to mark the menu item

VT Language.

➜Use the Volume keys to select VT languages

WEST, EAST or WEST+TR, then press the OK key to store in memory.

WEST Western Europe, including Germany

EAST Eastern Europe

WEST+TR Western Europe plus Turkey

➜Use the RADIO/TV key to return to the TV picture, or press the MENU key to return to the menu

Programmes Settings.

Settings

Programming for Satellite Channels

The following programming instructions are to be used only for satellite channels received via a built-in satellite module. It is a prerequi- site that the characteristics of the external installation must be in accordance with the characteristics stored under the menu item External Unit in the Programmes menu.

Hint: The enclosed list of satellite programmes

contains the required information.

➜Use the MENU key to display the Main Menu.

➜Use the Programme keys to mark the menu item

Programmes, then press the OK key to select. The Programmes menu will be displayed.

➜Use the Programme keys to mark the menu item Programmes Settings, then press the OK key to select.

A list of stored programmes will be displayed.

Hint: Use the Volume keys in order to page through the list in blocks of ten programmes at a time.

➜Use the Programme keys to mark the programme

slot you wish to change, then press the OK key to select.

The following programming menus of a channel will be displayed, showing the details specific to that channel.

➜Use the Programme keys to go on to the second menu table.

All menu items can be changed and stored in memory as described below.