Index of keywords
| Page |
16: 9 format | 8 |
22 kHz signal | 16 |
ADR module | 3 |
ADR - store programmes | 23ff |
ADR - programme list | 14 |
ADR - operation | 23 |
AFC | 12 |
Audio type (setting) | 12 |
Audio type (table) | 24 |
AV equipment | 18 |
AVL - store | 9 |
Camcorder - connecting | 19 |
Changing batteries | 3 |
Channel selection | 10 |
Cinch socket | 18ff |
Computer connection | 22ff |
Copy function (video) | 18 |
Date display | 7 |
Decoder - setting EC1 | 11,13 |
DiSEqC | 16ff |
Dual channel sound broadcasts | 6 |
DVD players | 9,18 |
Fine tuning | 10 |
Format adjustment | 8 |
Freez frame function | 6 |
Frequency of satellite programme | 12 |
Front control panel | 18ff |
Gain control - set | 13 |
Headphones - connecting | 21 |
Headphones - store volume | 9 |
4,18,21 | |
Hosiden socket | 18ff |
LNB | 16ff |
LNB feed | 17 |
LOF - setting | 16ff |
Main Menu | 8ff |
Matrix | 17 |
Menu | 8ff |
Mute | 6 |
Name of programme - setting | 11ff |
Noise suppression - set | 8 |
Norm | 10 |
8ff | |
Operating a video recorder | 3 |
PALplus decoder | 8 |
Parental control | 6 |
Polarisation of satellite transmissions | 12 |
Polarity (video) | 16 |
Position of a satellite | 16ff |
Programmes - insert, copy, delete, exchange | 14ff |
Programmes - receive scrambled/encoded | 19 |
Programme settings - store | 10ff |
Programmes - source | 10,12 |
Quiz solutions - display | 7 |
Radio mode | 13,23 |
Remote control | 4 |
RGB reproduction | 19 |
Satellite external unit | 11,16 |
Satellite module | 3 |
Satellite - selecting | 12 |
Satellite - setting | 16 |
Satellite receiver - connecting | 18 |
SCART socket | 18ff |
Sleep timer - set | 21 |
Sound reproduction in VGA mode | 22 |
Sound settings | 9 |
Standby | 5 |
Stereo | 6 |
SVHS/Hi8 reproduction | 19 |
Tele text | 7 |
Tele text - language | 11,13 |
Time | 20 |
Time - clock display | 6 |
Timer - setting | 20ff |
TOP tele text | 6 |
TTS (automatic programme scan) | 3,14 |
VGA - setting up connection | 22ff |
Video recorder - connecting | 18 |
Volume - store setting | 9 |
VPS times - display | 7 |
Zoom function | 6 |
Trouble-shooting guide
What if the TV set cannot be switched on, or the picture tube does not light up?
Switch on and off once using the Power key, if this does not help, call a technician.
No picture, no sound, no indicator light
No current
Power plugged in?
Power switch on?
No picture, sound working
TV set is in radio mode (only when in satellite mode)
When switching on for the first time, the initial setup described on page 3 is not shown
The initial setup is possible only once, and may have been dele- ted by the retailer. You can still set all programmes via the auto- matic scan (see pp. 10 ff)
Remote control not working, front panel controls okay
Check batteries of remote control
Remote control not working even with fresh batteries
Set operating code TV to remote control
Only noise received, no programme on screen
Check antenna
Ghost images, double contours on several programmes, or noise interference (in cable configurations)
Try to improve with the aid of Fine Tuning
Black or white spikes in picture (with satellite reception)
Check external satellite unit (direction of dish, cable and multi- switch connections)
Correct satellite frequency (see page 12) AFC switched on?
Strong rain or snowfall
If LOF of the LNB out of alignment due to temperature changes, correct LOF
Satellite programmes with horizontal polarisation not received
LNB feed voltage too low, increase by 1V to 14/19V (see page 17)
Occasional stripes in picture
Cable setup may not be in order
Interference could be from other electrical appliances, or other programmes
TV set switches itself on
Check whether sleep timer set
Picture suddenly dark, or sound off on all programmes Call technician
Colour spots appear in picture after turning TV set, or through magnetic influences
Remove sources of magnetic interference, e.g. move loudspea- ker boxes further away
Switch set off and only switch on again after at least 10 minutes
Errors in tele text tables
Antenna signal weak or interrupted
Programme setting not accurate
Recording with programme timer not working
Internal clock not working, or not set correctly (clock can be set by switching on and off)
Programme slot 1 is a programme that does not provide tele text
Poor picture quality on programme slot 1 Check whether recording timer set correctly Check video recorder connection (SCART cable)
No picture from computer in VGA mode
Break in VGA cable (TV image appears double and superimpo- sed on screen)
Image from computer not legible in VGA mode
Check whether VGA resolution (640 x 480 pixels, 60 Hz) set in computer
Boot computer in Safe Mode, then select resolution
Never try to repair a defective TV set yourself! Opening the housing as well as incorrectly exe- cuted repairs can endanger your life!
26