Operation and Safety
Remote control / changing batteries
➜Apply slight pressure to the marked spot in order to open the back cover of the remote control unit.
➜Insert the batteries supplied with the set, ensuring that their polarity complies with that indicated in the battery compartment.
➜Now, close the battery compartment again.
➜Press the TV key, in order to switch over to TV control level. If you forget this step, theTV set will not respond to keyed instructions.
Note !
➫The TV key must be pressed after each time the batteries have been changed, in order to reset the operating code for the set!
➫If batteries have been in use for some time, and are nearing the end of their life, there may be mal- functions of the remote control.
➫We recommend that you use Micro AAA/R3 alkali- ne batteries for the remote control.
➫Spent batteries must be disposed of correctly, or handed to your retailer.
➫The remote control can be used to operate the TV set, a video recorder as well as two satellite recei- vers, provided they utilise specific addresses of the
➫The keys PIP, ZOOM, ? and INFO allow you to operate the Rewind, Stop, Play and Fast Forward functions of a video recorder.
➫The EPG key on the remote control is of no signifi- cance.
Any characteristics marked with * are fun- ctions that are not available in all TV models covered by this manual.
Initial Operation
The set is set at the factory for a
➜Connect the antenna cable to the antenna socket at the rear of the TV set.
➜* Connect
➜Connect power plug to the power supply.
➜Switch on the TV set via the power switch on the
TV control panel.
The power control light will light up in green.
After a short time, a menu for selecting your prefer- red language will be displayed on the screen.
➜Use the Programme keys on the remote control
unit to select the language (e.g. English), and con- firm by pressing OK.
The menu Land (Country) will now be displayed.
➜Use the Programme keys to mark the country
(e.g. GERMANY), confirm by pressing OK this will initiate the TTS scan.
TTS is an automatic scan and search for all pro- grammes available.
The channels/stations found will be displayed in a list.
*If the TV set is fitted with a satellite modu- le, the satellite channels found will be added to the list of terrestrial or cable channels found, in accordance with the enclosed list of channels in this manual.
*If the TV set is fitted with an ADR module, the
At the end of the scan, all programmes have been found.
The menu Change Order will be displayed.
➜Pressing the RADIO / TV key will switch off the menu.
➜Pressing the Standby/on key will keep the TV set in standby mode.
➜Pressing the Standby/on key will switch on the TV set.
Switching the set on at this time will lead to the internal clock of the TV set being set to the time of the tele text clock of the channel on programme slot 1.
Your Initial Operation has been successfully con- cluded.
3